MIC2536-1YM-TR
| Parameters | |
|---|---|
| Rds On (Typ) | 400m Ω |
| Built-in Protections | OVER CURRENT; THERMAL |
| Output Current Flow Direction | SINK |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2015 |
| Feature | Slew Rate Controlled, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | MIC2536 |
| Number of Outputs | 2 |
| Output Voltage | 6V |
| Output Type | N-Channel |
| Max Output Current | 150mA |
| Supply Voltage-Max (Vsup) | 5.5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current |
| Output Peak Current Limit-Nom | 0.5A |
MIC2536-1YM-TR Overview
It is packaged in the manner of a Tape & Reel (TR).The 8-SOIC (0.154, 3.90mm Width) package contains it.Surface Mount is the mounting type of the LED driver.It owns the USB Switch switch type.In order to guarantee reliable performance, the temperature should be set to -40°C~85°C TA.By default, it is set to output 2.The LED driving board operates with a supply voltage of Not Required.Voltage output is N-Channel volts at maximum.It is equipped with Slew Rate Controlled, Status Flag features.I believe it belongs to the MIC2536 family.A total of 8 terminations can be found in it.The 8 pins are used to operate the LED driver.As far as the lighting driver is concerned, there are 2 functions.The maximum output current is reduced to 150mA to meet the operation criteria.It is possible to achieve a high level of efficiency with a supply voltage of 5V.The LED driving board is mounted in the way of Surface Mount.The lighting driver is configured to have a maximum supply voltage of 5.5V (Vsup).
MIC2536-1YM-TR Features
Supplied from 5V
MIC2536-1YM-TR Applications
There are a lot of Microchip Technology MIC2536-1YM-TR Power Switches ICs applications.
- Portable GPS Device
- Hot Swap
- PC Cards
- Wireless/Networking Cards
- PC Card Hot Swap
- Hard Disk Drives
- PDAs
- Wearable Devices
- Portable GPS
- USB3.1 Power Delivery
