MIC2536-1YMM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e4 |
| Feature | Slew Rate Controlled, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Resistance | 700mOhm |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Current Rating | 400mA |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MIC2536 |
| Number of Outputs | 2 |
| Output Voltage | 6V |
| Output Type | N-Channel |
| Max Output Current | 150mA |
| Supply Voltage-Max (Vsup) | 5.5V |
| Number of Channels | 2 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Nominal Supply Current | 5μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Turn On Delay Time | 1.5 ms |
| Switch Type | USB Switch |
| Turn-Off Delay Time | 130 μs |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current |
| Rds On (Typ) | 400m Ω |
| Height Seated (Max) | 1.09mm |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2536-1YMM Overview
Tube is the way it's packaged.The 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package contains it.The LED driver is mounted as Surface Mount.It owns the USB Switch switch type.It is recommended that the temperature be set to -40°C~85°C TA for reliable operation.The LED driver has a total of 2 outputs.Operation is based on Not Required supply voltage.It has a maximum output voltage of N-Channel volts.It has a total of Slew Rate Controlled, Status Flag features.The MIC2536 family contains this object.It consists of 8 terminations in total.The operation is performed through the 8 pins.As far as the lighting driver is concerned, there are 1 functions.The maximum output current must drop to 150mA to meet the operation criteria.Using a voltage of 5V allows for high efficiency.As a result, it is mounted in the manner of Surface Mount.It has 700mOhm resistance.This LED driver is configured to have a maximum supply voltage of 5.5V (Vsup).In this lighting driver, POWER SUPPLY SUPPORT CIRCUIT is the analog IC.There are a total of 2 available channels.
MIC2536-1YMM Features
Supplied from 5V
Resistance of 700mOhm
2 channels
MIC2536-1YMM Applications
There are a lot of Microchip Technology MIC2536-1YMM Power Switches ICs applications.
- Portable Video Game Players
- Notebook and Tablet Computers
- PDAs
- Hot Swap
- Portable Music Players
- HDD and SSD
- USB3.1 Power Delivery
- USB Ports/Hubs
- Hot Swaps
- Smart Phones, Feature Phones
