MIC2536-1YMM-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| Feature | Slew Rate Controlled, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MIC2536 |
| Number of Outputs | 2 |
| Output Voltage | 6V |
| Output Type | N-Channel |
| Max Output Current | 150mA |
| Supply Voltage-Max (Vsup) | 5.5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current |
| Output Peak Current Limit-Nom | 0.5A |
| Rds On (Typ) | 400m Ω |
| Built-in Protections | OVER CURRENT; THERMAL |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 1.09mm |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2536-1YMM-TR Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).There is a package for it in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package.The lighting driver has the mounting type Surface Mount.There is a switch type of USB Switch.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.As a default, the output is set to 2.Operation is based on Not Required supply voltage.A maximum voltage of N-Channel volts is available from the output of this LED driver.The lighting driver has Slew Rate Controlled, Status Flag features.It is part of the MIC2536 family of LED drivers.It contains 8 terminations.The 8 pins are used to operate the LED driver.As far as functions are concerned, the lighting driver has 2.The maximum output current must drop to 150mA to meet the operation criteria.As long as the supply voltage is 5V, high efficiency can be achieved.The lighting driver is mounted in the way of Surface Mount.A maximum supply voltage of 5.5V is set in Vsup.
MIC2536-1YMM-TR Features
Supplied from 5V
MIC2536-1YMM-TR Applications
There are a lot of Microchip Technology MIC2536-1YMM-TR Power Switches ICs applications.
- Wireless/Networking Cards
- Hot Swap
- Low Voltage I/O System Power
- Handheld Devices
- Wireless Modem Data Cards
- Various applications equipped with buttons
- HDD, SSD
- Wireless Headsets
- Wearable Devices
- Storage (HDDs, SSDs)
