MIC2536-2YM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2002 |
| Feature | Slew Rate Controlled, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Resistance | 700mOhm |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Current Rating | 275mA |
| Base Part Number | MIC2536 |
| Number of Outputs | 2 |
| Output Voltage | 6V |
| Output Type | N-Channel |
| Max Output Current | 150mA |
| Interface | On/Off |
| Nominal Supply Current | 60μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 1.5 ms |
| Switch Type | USB Switch |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 130 μs |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current |
| Output Peak Current Limit-Nom | 0.5A |
| Rds On (Typ) | 400m Ω |
| Built-in Protections | OVER CURRENT; THERMAL |
| Output Current Flow Direction | SINK |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2536-2YM Overview
The LED driver's packaged as a Tube.There is a 8-SOIC (0.154, 3.90mm Width) package that includes it.Mounting type Surface Mount is selected for the LED driving board.It owns the USB Switch switch type.It is recommended to set the temperature to -40°C~85°C TA in order to ensure reliable operation.By default, it is set to output 2.In order to operate, it requires a voltage supply of Not Required.Voltage output is N-Channel volts at maximum.As far as features are concerned, the LED driving board has Slew Rate Controlled, Status Flag.This object belongs to the MIC2536 family.A total of 8 terminations can be found in it.For operation, we use the 8 pins.The LED driver has 2 functions.The maximum output current drops to 150mA in order to meet the operation criteria.It is possible to obtain high efficiency with a supply voltage of 5V.Surface Mount is mounted in the way.700mOhm resistance is present in the lighting driver.
MIC2536-2YM Features
Supplied from 5V
Resistance of 700mOhm
MIC2536-2YM Applications
There are a lot of Microchip Technology MIC2536-2YM Power Switches ICs applications.
- Notebook PC
- USB3.1 Power Delivery
- Wireless Modem Data Cards
- USB Protection
- Handheld Devices
- USB Power Distribution
- Telecom and Network Systems
- Portable Devices
- Portable GPS Device
- Wireless Headsets
