MIC2536-2YMM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2002 |
| Feature | Slew Rate Controlled, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Resistance | 700mOhm |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MIC2536 |
| Number of Outputs | 2 |
| Output Voltage | 6V |
| Output Type | N-Channel |
| Max Output Current | 150mA |
| Supply Voltage-Max (Vsup) | 5.5V |
| Interface | On/Off |
| Nominal Supply Current | 5μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 1.5 ms |
| Switch Type | USB Switch |
| Turn-Off Delay Time | 130 μs |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current |
| Output Peak Current Limit-Nom | 0.5A |
| Rds On (Typ) | 400m Ω |
| Built-in Protections | OVER CURRENT; THERMAL |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 1.09mm |
| Length | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2536-2YMM Overview
As a result, it is packaged in the form of a Tube.This package is included in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width).The lighting driver has the mounting type Surface Mount.The switch type is USB Switch.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.The LED driver is equipped with 2 outputs.The LED driving board operates with a supply voltage of Not Required.The maximum output voltage is N-Channel volts.It is equipped with Slew Rate Controlled, Status Flag features.The MIC2536 family consists of this type.It contains 8 terminations.The 8 pins are used for the operation of the system.Currently, there are 2 functions associated with the lighting driver.The maximum output current drops to 150mA in order to meet the operation criteria.The supply voltage can be 5V for high efficiency.It is mounted in the way of Surface Mount.Currently, the LED driving board has a resistance of 700mOhm ohms.The lighting driver is configured to have a maximum supply voltage of 5.5V (Vsup).
MIC2536-2YMM Features
Supplied from 5V
Resistance of 700mOhm
MIC2536-2YMM Applications
There are a lot of Microchip Technology MIC2536-2YMM Power Switches ICs applications.
- Storage Drives
- Mobile Communication Devices
- Storage (HDDs, SSDs)
- Telecom and Network Systems
- Wireless Headsets
- Various applications equipped with buttons
- Wireless/Networking Cards
- Portable GPS Device
- Hard Disk Drives
- Set-top-box
