banner_page

MIC2536-2YMM-TR

N-Channel 0.65mm PMIC MIC2536 8 Pin 5V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)


  • Manufacturer: Microchip Technology
  • Nocochips NO: 536-MIC2536-2YMM-TR
  • Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
  • Datasheet: PDF
  • Stock: 565
  • Description: N-Channel 0.65mm PMIC MIC2536 8 Pin 5V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Number of Pins 8
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
Feature Slew Rate Controlled, Status Flag
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 2
Supply Voltage 5V
Terminal Pitch 0.65mm
Base Part Number MIC2536
Number of Outputs 2
Output Voltage 6V
Output Type N-Channel
Max Output Current 150mA
Supply Voltage-Max (Vsup) 5.5V
Interface On/Off
Output Configuration High Side
Voltage - Supply (Vcc/Vdd) Not Required
Input Type Non-Inverting
Switch Type USB Switch
Ratio - Input:Output 1:2
Voltage - Load 2.7V~5.5V
Fault Protection Current Limiting (Fixed), Over Temperature, Reverse Current
Output Peak Current Limit-Nom 0.5A
Rds On (Typ) 400m Ω
Built-in Protections OVER CURRENT; THERMAL
Output Current Flow Direction SINK
Height Seated (Max) 1.09mm
Length 3mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free

MIC2536-2YMM-TR Overview


It is packaged in the manner of a Tape & Reel (TR).The 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package contains it.The mounting type of the LED driver is Surface Mount.USB Switch is the type of switch owned by it.It is recommended to set the temperature to -40°C~85°C TA in order to ensure reliable operation.The lighting driver is equipped with 2 outputs that can be used.Operation is based on a supply voltage of Not Required.A maximum voltage of N-Channel volts is available from the output of this LED driver.In terms of features, the LED driving board has Slew Rate Controlled, Status Flag.It belongs to the MIC2536 family.The termination count is 8.In order to operate, the 8 pins are used.As far as the lighting driver is concerned, there are 2 functions.The maximum output current drops to 150mA in order to meet the operation criteria.A supply voltage of 5V leads to high efficiency.This lighting driver is mounted in the way of Surface Mount.This LED driver is configured to have a maximum supply voltage of 5.5V (Vsup).

MIC2536-2YMM-TR Features


Supplied from 5V

MIC2536-2YMM-TR Applications


There are a lot of Microchip Technology MIC2536-2YMM-TR Power Switches ICs applications.

  • Set-Top Boxes
  • HDD, SSD
  • PDAs
  • Solid-State Drives
  • PC Cards
  • Portable GPS Device
  • Telecom and Network Systems
  • Low Voltage I/O System Power
  • Notebook and Tablet Computers
  • Hot Swap

Write a review

Note: HTML is not translated!
    Bad           Good