banner_page

MIC2537-1YM

N-Channel 1.27mm PMIC MIC2537 16 Pin 5V 16-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Microchip Technology
  • Nocochips NO: 536-MIC2537-1YM
  • Package: 16-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 719
  • Description: N-Channel 1.27mm PMIC MIC2537 16 Pin 5V 16-SOIC (0.154, 3.90mm Width) (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-SOIC (0.154, 3.90mm Width)
Number of Pins 16
Operating Temperature -40°C~85°C TA
Packaging Tube
Published 2002
Feature Slew Rate Controlled, Status Flag
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
Resistance 700mOhm
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 1.27mm
Base Part Number MIC2537
Number of Outputs 4
Output Type N-Channel
Max Output Current 100mA
Supply Voltage-Max (Vsup) 5.5V
Supply Voltage-Min (Vsup) 3V
Number of Channels 4
Interface On/Off
Analog IC - Other Type POWER SUPPLY SUPPORT CIRCUIT
Nominal Supply Current 70μA
Output Configuration High Side
Voltage - Supply (Vcc/Vdd) Not Required
Adjustable Threshold NO
Input Type Non-Inverting
Turn On Delay Time 510 μs
Switch Type USB Switch
Turn-Off Delay Time 150 μs
Ratio - Input:Output 1:4
Voltage - Load 3V~5.5V
Fault Protection Current Limiting (Fixed), Over Temperature
Rds On (Typ) 425m Ω
Height Seated (Max) 1.895mm
Length 9.9mm
Width 3.9mm
RoHS Status ROHS3 Compliant

MIC2537-1YM Overview


It's?packaged?in?the way?of?a?Tube.There is a package for it in the 16-SOIC (0.154, 3.90mm Width) package.It has been mounted as Surface Mount on the LED driver.The switch type is USB Switch.It is recommended that the temperature be set to -40°C~85°C TA for reliable operation.There is a default setting of 4 for output.In order to operate, it requires a voltage supply of Not Required.The maximum output voltage of this LED driver is N-Channel volts.It is equipped with Slew Rate Controlled, Status Flag features.It belongs to the MIC2537 family.It has a total of 16 terminations.16 pins are used for operation.The LED driving board has a total of 1 functions.The maximum output current drops to 100mA in order to meet the operation criteria.The supply voltage can be 5V for high efficiency.Surface Mount is mounted in the way.Currently, the LED driving board has 700mOhm resistance.Vsup (maximum supply voltage) is set to 5.5V.In order for this lighting driver to operate normally, the supply voltage (Vsup) should remain above 3V.The analog IC used in this lighting driver is POWER SUPPLY SUPPORT CIRCUIT.There are a total of 4 available channels.

MIC2537-1YM Features


Supplied from 5V
Resistance of 700mOhm
4 channels

MIC2537-1YM Applications


There are a lot of Microchip Technology MIC2537-1YM Power Switches ICs applications.

  • HDD and SSD
  • Storage Drives
  • USB Ports/Hubs
  • PDAs
  • Set-top-box
  • Smart Phones, Feature Phones
  • Portable GPS
  • Handheld Devices
  • USB Power Distribution
  • PC Cards

Write a review

Note: HTML is not translated!
    Bad           Good