MIC2537-2YM
| Parameters | |
|---|---|
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2002 |
| Feature | Slew Rate Controlled, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 700mOhm |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | MIC2537 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Max Output Current | 100mA |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 4 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Nominal Supply Current | 70μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Turn On Delay Time | 510 μs |
| Switch Type | USB Switch |
| Turn-Off Delay Time | 150 μs |
| Ratio - Input:Output | 1:4 |
| Voltage - Load | 3V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 425m Ω |
| Height Seated (Max) | 1.895mm |
| Length | 9.9mm |
| Width | 3.9mm |
MIC2537-2YM Overview
It is package in Tube case.In the 16-SOIC (0.154, 3.90mm Width) package, it is included.This LED driving board is mounted using the mounting type Surface Mount.There is a switch type of USB Switch.It is recommended to set the temperature to -40°C~85°C TA in order to ensure reliable operation.The LED driver has 4 outputs.Operation is based on Not Required supply voltage.The maximum output voltage of this LED driver is N-Channel volts.It has a total of Slew Rate Controlled, Status Flag features.The MIC2537 family contains this object.There are 16 terminations in it.In order to operate, the 16 pins are used.It contains 1 functions.To comply with the operation criteria, the maximum output current is reduced to 100mA.As long as the supply voltage is 5V, high efficiency can be achieved.The LED driving board is mounted in the way of Surface Mount.There is 700mOhm resistance on the LED driver.This LED driver is configured to have a maximum supply voltage of 5.5V (Vsup).Normal operation requires Vsup above 3V.In this case, a digital IC is used, which is POWER SUPPLY SUPPORT CIRCUIT.There are a total of 4 channels available.
MIC2537-2YM Features
Supplied from 5V
Resistance of 700mOhm
4 channels
MIC2537-2YM Applications
There are a lot of Microchip Technology MIC2537-2YM Power Switches ICs applications.
- Wireless/Networking Cards
- Portable GPS Device
- Hot Swap
- PC Card Hot Swap
- Storage Drives
- HDD, SSD
- Portable Video Game Players
- Telecom and Network Systems
- Smartphone and PDA
- Hot Swap
