MIC2544-1YM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-SOIC |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2010 |
| Feature | Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 80mOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Current Rating | 1.5A |
| Base Part Number | MIC2544 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Current - Output (Max) | 1.5A |
| Nominal Supply Current | 5μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 5 ms |
| Switch Type | USB Switch |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 22 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature |
| Load Current | 1.5A |
| Rds On (Typ) | 80mOhm |
| Drain to Source Resistance | 120mOhm |
| Height | 1.38mm |
| Length | 5mm |
| Width | 3.99mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2544-1YM Overview
It is packaged in the manner of a Tube.This package is included in 8-SOIC (0.154, 3.90mm Width).It has been mounted as Surface Mount on the LED driver.It owns USB Switch switch type.Ensure reliable operation by setting the temperature to -40°C~85°C TA.The lighting driver has a total of 1 outputs that are available for use.The LED driving board operates with a supply voltage of Not Required.The maximum output voltage of this LED driver is N-Channel volts.Currently, the LED driving board is equipped with Status Flag features.It belongs to the MIC2544 family.During operation, the 8 pins are used.Its maximum output voltage is 1.5AV.In order to meet the operation criteria, the maximum output current drops to 1.5A.Surface Mount is mounted in the way of this LED driving board.It has a resistance of 80mOhm.In total, there are 1 channels available.In order to optimize the efficiency of the supply voltage, it should be set to 5.5V.The maximum input voltage is 5.5V volts.Input voltage must be at least 2.7V volts.In order to ensure stable operation, a maximum operating temperature of 85°C°C should be maintained.To ensure reliability, the unit operates at a temperature of -40°C degrees Celsius.There is a maximum voltage of 5.5VV that it can handle.If required, it can operate at 2.7V volts as well.
MIC2544-1YM Features
Resistance of 80mOhm
1 channels
MIC2544-1YM Applications
There are a lot of Microchip Technology MIC2544-1YM Power Switches ICs applications.
- PC Card Hot Swap
- USB Ports/Hubs
- PDAs
- Solid-State Drives
- Hot Swaps
- USB Power Distribution
- Storage (HDDs, SSDs)
- Wireless/Networking Cards
- Wireless Headsets
- Notebook and Tablet Computers
