MIC2544-2YM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-SOIC |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2004 |
| Feature | Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 120mOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Current Rating | 1.5A |
| Base Part Number | MIC2544 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1.5A |
| Number of Channels | 1 |
| Interface | On/Off |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Current - Output (Max) | 1.5A |
| Nominal Supply Current | 75μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 5 ms |
| Switch Type | USB Switch |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 22 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature |
| Rds On (Typ) | 80mOhm |
| Drain to Source Resistance | 120mOhm |
| Height | 1.63mm |
| Length | 5mm |
| Width | 3.99mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2544-2YM Overview
It is packaged in the form of a Tube.This file is included in package 8-SOIC (0.154, 3.90mm Width).The lighting driver has the mounting type Surface Mount.USB Switch is the switch type that it owns.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.There is a default setting of 1 for output.The LED driving board operates with a supply voltage of Not Required.The maximum output voltage is N-Channel volts.The lighting driver has Status Flag features.It belongs to the MIC2544 family.The 8 pins are used to operate the LED driver.The lighting driver's maximum output is 1.5AV.This operation requires the maximum output current to be decreased to 1.5A.It is positioned in the direction of Surface Mount.It has a resistance of 120mOhm.A total of 1 channels are available for you to choose from.The maximum input voltage of the LED driver is 5.5V volts.A minimum input voltage of 2.7V volts is required for this LED driver.It is suitable for stable operation to operate at a maximum temperature of 85°C°C.Reliability is ensured by operating at a minimum working temperature of -40°C degrees Celsius.In addition to 5.5VV, it can handle other voltages as well.A supply voltage of 2.7VV is sufficient for it to work.
MIC2544-2YM Features
Resistance of 120mOhm
1 channels
MIC2544-2YM Applications
There are a lot of Microchip Technology MIC2544-2YM Power Switches ICs applications.
- Portable GPS Device
- Portable GPS
- HDD and SSD
- HDD, SSD
- Set-top-box
- Portable Music Players
- Smartphone and PDA
- USB Power Distribution
- Low Voltage I/O System Power
- Hot Swaps
