banner_page

MIC2544A-1YM

N-Channel PMIC MIC2544A 8 Pin 8-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Microchip Technology
  • Nocochips NO: 536-MIC2544A-1YM
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 598
  • Description: N-Channel PMIC MIC2544A 8 Pin 8-SOIC (0.154, 3.90mm Width) (Kg)

Details

Tags

Parameters
Turn On Delay Time 5 ms
Switch Type USB Switch
Min Input Voltage 2.7V
Max Input Voltage 5.5V
Nominal Input Voltage 5.5V
Turn-Off Delay Time 30 μs
Ratio - Input:Output 1:1
Voltage - Load 2.7V~5.5V
Fault Protection Current Limiting (Adjustable), Over Temperature
Rds On (Typ) 80mOhm
Height 1.63mm
Length 5mm
Width 3.99mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Supplier Device Package 8-SOIC
Operating Temperature -40°C~85°C TA
Packaging Tube
Published 2010
Feature Status Flag
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Resistance 120mOhm
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Base Part Number MIC2544A
Number of Outputs 1
Output Type N-Channel
Max Output Current 1.5A
Interface On/Off
Max Supply Voltage 5.5V
Min Supply Voltage 2.7V
Current - Output (Max) 1.5A
Nominal Supply Current 160μA
Output Configuration High Side
Voltage - Supply (Vcc/Vdd) Not Required
Input Type Non-Inverting

MIC2544A-1YM Overview


Tube is how it's packaged.Package 8-SOIC (0.154, 3.90mm Width) contains it.Surface Mount is the mounting type of the LED driver.The switch type is USB Switch.To ensure reliable operation, set the temperature to -40°C~85°C TA.It is possible to use 1 outputs in the lighting driver.With a supply voltage of Not Required, the LED driving board operates.A maximum output voltage of N-Channel volts has been specified.This LED driving board is equipped with Status Flag features in order for it to be useful.As you can see, it comes from the MIC2544A family.It is necessary to use the 8 pins in order to operate the LED driver.In this case, the LED driving board can produce only 1.5AV as its maximum output.The maximum output current must drop to 1.5A to meet the operation criteria.This lighting driver is mounted in the way of Surface Mount.There is 120mOhm resistance on the LED driver.Its maximum input voltage is 5.5V volts.As a minimum input voltage, it requires 2.7V volts.The maximum operating temperature of 85°C°C allows for stable operation.Reliability is ensured by operating at a minimum working temperature of -40°C degrees Celsius.As a result, it is only capable of handling voltages up to 5.5VV.It can operate at 2.7V volts as well.

MIC2544A-1YM Features


Resistance of 120mOhm

MIC2544A-1YM Applications


There are a lot of Microchip Technology MIC2544A-1YM Power Switches ICs applications.

  • Portable Music Players
  • Set-top-box
  • USB Power Distribution
  • Portable GPS Device
  • Telecom and Network Systems
  • Solid State Drivers
  • Portable Video Game Players
  • Gaming
  • USB Power Distribution
  • USB Protection

Write a review

Note: HTML is not translated!
    Bad           Good