MIC2545A-1BN
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Feature | Slew Rate Controlled, Status Flag |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Terminal Finish | TIN LEAD |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T8 |
| Number of Outputs | 1 |
| Qualification Status | COMMERCIAL |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | On/Off |
| Current - Output (Max) | 3A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, Reverse Current |
| Turn On Time | 5000 µs |
| Output Peak Current Limit-Nom | 0.5A |
| Rds On (Typ) | 35m Ω |
| Built-in Protections | OVER CURRENT; THERMAL |
| Output Current Flow Direction | SOURCE |
| Length | 9.525mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
MIC2545A-1BN Overview
As a result, it is packaged in the form of a Tube.It's included in the 8-DIP (0.300, 7.62mm) package.This LED driving board is mounted using the mounting type Through Hole.USB Switch is the switch type that it owns.In order to guarantee reliable performance, the temperature should be set to -40°C~85°C TA.The lighting driver has a total of 1 outputs that are available for use.The LED driving board operates with a supply voltage of Not Required.It produces a maximum output voltage of N-Channel volts at its maximum output.In terms of features, the LED driving board has Slew Rate Controlled, Status Flag.It contains 8 terminations.It has 1 functions.This lighting driver is capable of delivering a maximum output of 3A volts.As long as the supply voltage is 5V, high efficiency can be achieved.This LED driver is equipped with a total of 8 pins.The Vsup value (maximum supply voltage) is set to 5.5V.For normal operation, the supply voltage (Vsup) should be kept above 2.7V.
MIC2545A-1BN Features
Supplied from 5V
MIC2545A-1BN Applications
There are a lot of Rochester Electronics, LLC MIC2545A-1BN Power Switches ICs applications.
- PDAs
- Low Voltage I/O System Power
- Telecom and Network Systems
- Solid-State Drives
- Storage (HDDs, SSDs)
- USB Protection
- Portable Music Players
- Notebook PC
- Portable Video Game Players
- Portable Devices
