MIC2545A-1YM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-SOIC |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2004 |
| Feature | Slew Rate Controlled, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 35mOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Current Rating | 3A |
| Base Part Number | MIC2545A |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 3A |
| Number of Channels | 1 |
| Interface | On/Off |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Current - Output (Max) | 3A |
| Nominal Supply Current | 150μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 5 ms |
| Switch Type | USB Switch |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 25 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, Reverse Current |
| Rds On (Typ) | 35mOhm |
| Height | 1.63mm |
| Length | 5mm |
| Width | 3.99mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2545A-1YM Overview
It is package in Tube case.There is a package for it in the 8-SOIC (0.154, 3.90mm Width) package.Surface Mount is the mounting type of the LED driver.It owns USB Switch switch type.It is recommended that the temperature be set to -40°C~85°C TA for reliable operation.The lighting driver has a total of 1 outputs that are available for use.Operation is based on a supply voltage of Not Required.The maximum output voltage is N-Channel volts.The lighting driver has Slew Rate Controlled, Status Flag features.It is part of the MIC2545A family of LED drivers.For operation, 8 pins are used.The maximum output of the LED driving board is 3AV.As a result, the maximum output current is reduced to 3A in order to meet the operation requirements.Surface Mount is mounted in the way.35mOhm is the resistance of the lighting driver.You can select from 1 channels.Voltage input is limited to 5.5V volts.It requires 2.7V volts as the minimum input voltage.It is suitable for stable operation to operate at a maximum temperature of 85°C°C.A minimum working temperature of -40°C degrees Celsius is required to ensure its reliability.This LED driving board can handle voltages up to 5.5VV.It can operate at low supply voltages, such as 2.7V volts.
MIC2545A-1YM Features
Resistance of 35mOhm
1 channels
MIC2545A-1YM Applications
There are a lot of Microchip Technology MIC2545A-1YM Power Switches ICs applications.
- Smartphone and PDA
- Gaming
- Smart Phones, Feature Phones
- Various applications equipped with buttons
- Hot Swaps
- Wireless/Networking Cards
- USB3.1 Power Delivery
- PC Card Hot Swap
- Set-Top Boxes
- Mobile Communication Devices
