MIC2545A-2BM-TR
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2000 |
| JESD-609 Code | e0 |
| Feature | Slew Rate Controlled, Status Flag |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MIC2545A |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | On/Off |
| Current - Output (Max) | 3A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, Reverse Current |
| Turn On Time | 5000 µs |
| Output Peak Current Limit-Nom | 0.5A |
| Rds On (Typ) | 35m Ω |
| Built-in Protections | OVER CURRENT; THERMAL |
| Output Current Flow Direction | SINK |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
MIC2545A-2BM-TR Overview
The package is in the form of a Tape & Reel (TR).This package is included in 8-SOIC (0.154, 3.90mm Width).In this case, the LED driving board is mounted as Surface Mount.USB Switch is the type of switch owned by it.The temperature should be set to -40°C~85°C TA to ensure reliable functioning.In this LED driver, there are no outputs available.Operation is based on a supply voltage of Not Required.Voltage output is N-Channel volts at maximum.There are Slew Rate Controlled, Status Flag features available on the LED driving board.It belongs to the family MIC2545A.In total, there are 8 terminations.As far as the lighting driver is concerned, there are 1 functions.The maximum output of the LED driving board is 3AV.A supply voltage of 5V leads to high efficiency.It is equipped with a total of 8 pins.The maximum supply voltage for this lighting driver is set to 5.5V (Vsup).The supply voltage (Vsup) should be kept above 2.7V for normal operation.
MIC2545A-2BM-TR Features
Supplied from 5V
MIC2545A-2BM-TR Applications
There are a lot of Microchip Technology MIC2545A-2BM-TR Power Switches ICs applications.
- USB Ports/Hubs
- Various applications equipped with buttons
- PDAs
- Portable GPS Device
- USB Power Distribution
- Wireless/Networking Cards
- Hard Disk Drives
- Notebook PC
- PC Card Hot Swap
- Storage (HDDs, SSDs)
