banner_page

MIC2545A-2BN

N-Channel 2.54mm PMIC 5V 8-DIP (0.300, 7.62mm)


  • Manufacturer: Rochester Electronics, LLC
  • Nocochips NO: 699-MIC2545A-2BN
  • Package: 8-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 615
  • Description: N-Channel 2.54mm PMIC 5V 8-DIP (0.300, 7.62mm) (Kg)

Details

Tags

Parameters
Mounting Type Through Hole
Package / Case 8-DIP (0.300, 7.62mm)
Surface Mount NO
Operating Temperature -40°C~85°C TA
Packaging Tube
JESD-609 Code e0
Feature Slew Rate Controlled, Status Flag
Pbfree Code no
Part Status Obsolete
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 8
Terminal Finish TIN LEAD
Terminal Position DUAL
Peak Reflow Temperature (Cel) 240
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 2.54mm
Time@Peak Reflow Temperature-Max (s) 30
Pin Count 8
JESD-30 Code R-PDIP-T8
Number of Outputs 1
Qualification Status COMMERCIAL
Output Type N-Channel
Supply Voltage-Max (Vsup) 5.5V
Supply Voltage-Min (Vsup) 2.7V
Interface On/Off
Current - Output (Max) 3A
Output Configuration High Side
Voltage - Supply (Vcc/Vdd) Not Required
Input Type Non-Inverting
Switch Type USB Switch
Ratio - Input:Output 1:1
Voltage - Load 2.7V~5.5V
Fault Protection Current Limiting (Adjustable), Over Temperature, Reverse Current
Turn On Time 5000 µs
Output Peak Current Limit-Nom 0.5A
Rds On (Typ) 35m Ω
Built-in Protections OVER CURRENT; THERMAL
Output Current Flow Direction SOURCE
Length 9.525mm
Width 7.62mm
RoHS Status Non-RoHS Compliant

MIC2545A-2BN Overview


It's?packaged?in?the way?of?a?Tube.It's included in the 8-DIP (0.300, 7.62mm) package.The mounting type of the LED driver is Through Hole.It owns the USB Switch switch type.It is recommended to set the temperature to -40°C~85°C TA in order to ensure reliable operation.There is a default setting of 1 for output.With a supply voltage of Not Required, the LED driving board operates.There is a maximum output voltage of N-Channel volts.It is equipped with Slew Rate Controlled, Status Flag features.It contains 8 terminations.It contains 1 functions.From the lighting driver, there is a maximum output of 3AV.It is possible to obtain high efficiency with a supply voltage of 5V.This LED driver is equipped with a total of 8 pins.The Vsup value (maximum supply voltage) is set to 5.5V.For normal operation, the supply voltage (Vsup) should be kept above 2.7V.

MIC2545A-2BN Features


Supplied from 5V

MIC2545A-2BN Applications


There are a lot of Rochester Electronics, LLC MIC2545A-2BN Power Switches ICs applications.

  • Notebook PC
  • HDD, SSD
  • Notebook and Tablet Computers
  • Low Voltage I/O System Power
  • Wearable Devices
  • Gaming
  • USB Power Distribution
  • Storage (HDDs, SSDs)
  • Hot Swap
  • Handheld Devices

Write a review

Note: HTML is not translated!
    Bad           Good