MIC2545A-2YN
| Parameters | |
|---|---|
| Published | 2000 |
| JESD-609 Code | e3 |
| Feature | Slew Rate Controlled, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 50mOhm |
| Terminal Finish | MATTE TIN |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MIC2545A |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 3A |
| Interface | On/Off |
| Nominal Supply Current | 90μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 5 ms |
| Switch Type | USB Switch |
| Min Input Voltage | 2.7V |
| Number of Inputs | 2 |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 25 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, Reverse Current |
| Turn On Time | 5000 μs |
| Output Peak Current Limit-Nom | 0.5A |
| Rds On (Typ) | 35m Ω |
| Built-in Protections | OVER CURRENT; THERMAL |
| Output Current Flow Direction | SOURCE |
| Height | 3.81mm |
| Length | 9.53mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
MIC2545A-2YN Overview
As you can see, it's packaged in the way of a Tube.This file is included in package 8-DIP (0.300, 7.62mm).In this case, the LED driving board is mounted as Through Hole.The switch type is USB Switch.It is recommended that the temperature be set to -40°C~85°C TA for reliable performance.In this LED driver, there are no outputs available.In order to operate, it requires a voltage supply of Not Required.There is a maximum output voltage of N-Channel volts on this LED driver.This LED driving board is equipped with Slew Rate Controlled, Status Flag features in order for it to be useful.This object belongs to the MIC2545A family.A total of 8 terminations have been found in it.In order to operate, 8 pins are used.As far as functions are concerned, the lighting driver has 1.The maximum output current must drop to 3A to meet the operation criteria.Supply voltages of 5V allow for high efficiency.The LED driving board is mounted in the way of Through Hole.It has 50mOhm resistance.This LED driver can handle voltages up to 5.5V volts.Input voltage must be at least 2.7V volts.There are 2 inputs available.
MIC2545A-2YN Features
Supplied from 5V
Resistance of 50mOhm
MIC2545A-2YN Applications
There are a lot of Microchip Technology MIC2545A-2YN Power Switches ICs applications.
- Notebook and Tablet Computers
- Solid State Drivers
- PDAs
- Notebook PC
- Portable Devices
- Portable Music Players
- HDD, SSD
- Wireless/Networking Cards
- Wearable Devices
- Telecom and Network Systems
