MIC2546-1YM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 120mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Current Rating | 1.5A |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MIC2546 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 1.5A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Interface | On/Off |
| Nominal Supply Current | 200μA |
| Output Configuration | High Side |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 5 ms |
| Switch Type | USB Switch |
| Turn-Off Delay Time | 22 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, Reverse Current |
| Turn On Time | 5000 μs |
| Output Peak Current Limit-Nom | 0.1A |
| Rds On (Typ) | 80m Ω |
| Built-in Protections | OVER CURRENT; THERMAL |
| Height Seated (Max) | 1.895mm |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2546-1YM Overview
It is package in Tube case.It is included with the 16-SOIC (0.154, 3.90mm Width) package as well.This LED driving board is mounted using the mounting type Surface Mount.There is a switch type of USB Switch.Ensure reliable operation by setting the temperature to -40°C~85°C TA.There is a default setting of 2 for output.To operate, it needs a supply voltage of Not Required.A maximum output voltage of N-Channel volts can be obtained with this LED driver.In terms of features, the LED driving board has Status Flag.As you can see, it comes from the MIC2546 family.The termination count is 16.The operation is carried out using the 16 pins.It is important to note that the LED driving board has 1 functions.In order to meet the operation criteria, the maximum output current drops to 1.5A.With a supply voltage of 5V, high efficiency is possible.It is positioned in the direction of Surface Mount.Currently, the LED driving board has a resistance of 120mOhm ohms.This case results in a 1.5A output current.Vsup (maximum supply voltage) is set to 5.5V.
MIC2546-1YM Features
Supplied from 5V
Resistance of 120mOhm
MIC2546-1YM Applications
There are a lot of Microchip Technology MIC2546-1YM Power Switches ICs applications.
- Set-Top Boxes
- Notebook PC
- Hot-Swap Systems
- Portable GPS Device
- Various applications equipped with buttons
- Storage (HDDs, SSDs)
- PC Card Hot Swap
- Telecom and Network Systems
- HDD, SSD
- Portable/Handheld Devices
