MIC2546-1YM-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Resistance | 120MOhm |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Current Rating | 1.5A |
| Base Part Number | MIC2546 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 1.5A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, Reverse Current |
| Turn On Time | 5 μs |
| Rds On (Typ) | 80m Ω |
| Built-in Protections | OVER CURRENT; THERMAL |
| Height Seated (Max) | 1.895mm |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2546-1YM-TR Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).The 16-SOIC (0.154, 3.90mm Width) package contains it.This lighting drivere has a mounting type of Surface Mount.The switch type of this switch is USB Switch.To ensure reliable operation, the temperature should be set to -40°C~85°C TA.It is possible to use 2 outputs in the lighting driver.A supply voltage of Not Required is required for it to operate.A maximum output voltage of N-Channel volts can be achieved by this LED driver.This LED driving board is equipped with Status Flag features in order for it to be useful.It belongs to the MIC2546 family.As a result, there are 16 terminations.The 16 pins are used for the operation of the system.The LED driver has 1 functions.To comply with the operation criteria, the maximum output current is reduced to 1.5A.The supply voltage can be 3.3V for high efficiency.The lighting driver is mounted in the direction of Surface Mount.In this case, there is 120MOhm resistance in the LED driving board.This case results in a 1.5A output current.A maximum supply voltage of 5.5V is set in Vsup.
MIC2546-1YM-TR Features
Supplied from 3.3V
Resistance of 120MOhm
MIC2546-1YM-TR Applications
There are a lot of Microchip Technology MIC2546-1YM-TR Power Switches ICs applications.
- HDD and SSD
- Various applications equipped with buttons
- Low Voltage I/O System Power
- Portable GPS
- HDD, SSD
- Hot Swaps
- Storage (HDDs, SSDs)
- Handheld Devices
- USB Power Distribution
- Telecom and Network Systems
