MIC2546-1YTS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Supplier Device Package | 16-TSSOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2008 |
| Feature | Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 120mOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Base Part Number | MIC2546 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 1.5A |
| Interface | On/Off |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Current - Output (Max) | 1.5A |
| Nominal Supply Current | 200μA |
| Output Configuration | High Side |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 5 ms |
| Switch Type | USB Switch |
| Number of Inputs | 2 |
| Turn-Off Delay Time | 22 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, Reverse Current |
| Rds On (Typ) | 80mOhm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2546-1YTS Overview
As you can see, it's packaged in the way of a Tube.There is a 16-TSSOP (0.173, 4.40mm Width) package that includes it.A Surface Mount mounting is used for the LED driving board.This switch is of type USB Switch.It is recommended to set the temperature to -40°C~85°C TA in order to ensure reliable operation.The lighting driver is equipped with 2 outputs that can be used.The LED driving board is powered by a voltage of Not Required.There is a maximum output voltage of N-Channel volts on this LED driver.In terms of features, the LED driving board has Status Flag.It belongs to the family MIC2546.The 16 pins are used to operate the LED driver.The LED driver output is limited to 1.5AV.In order to meet the operation criteria, the maximum output current drops to 1.5A.The LED driving board is mounted in the way of Surface Mount.Currently, the LED driving board has a resistance of 120mOhm ohms.In this case, the output current is set to 1.5A.It is suitable for stable operation to operate at a maximum temperature of 85°C°C.In order to ensure reliability, it must operate at a minimum temperature of -40°C degrees Celsius.5.5VV is the maximum supply voltage it can handle.It is possible to use a voltage as low as 2.7V V as a power supply voltage.We have available 2 inputs.
MIC2546-1YTS Features
Resistance of 120mOhm
MIC2546-1YTS Applications
There are a lot of Microchip Technology MIC2546-1YTS Power Switches ICs applications.
- Portable Music Players
- Portable/Handheld Devices
- Solid State Drivers
- USB Power Distribution
- HDD, SSD
- PDAs
- Telecom and Network Systems
- USB Ports/Hubs
- Hot Swap
- HDD and SSD
