Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Number of Pins |
16 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
Published |
2008 |
JESD-609 Code |
e3 |
Feature |
Status Flag |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
120mOhm |
Terminal Finish |
Matte Tin (Sn) |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
MIC2546 |
Number of Outputs |
2 |
Qualification Status |
Not Qualified |
Output Type |
N-Channel |
Max Output Current |
1.5A |
Supply Voltage-Max (Vsup) |
5.5V |
Interface |
On/Off |
Nominal Supply Current |
200μA |
Output Configuration |
High Side |
Output Current |
1.5A |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Input Type |
Non-Inverting |
Turn On Delay Time |
5 ms |
Switch Type |
USB Switch |
Turn-Off Delay Time |
22 μs |
Ratio - Input:Output |
1:1 |
Voltage - Load |
2.7V~5.5V |
Fault Protection |
Current Limiting (Adjustable), Over Temperature, Reverse Current |
Turn On Time |
5000 μs |
Output Peak Current Limit-Nom |
0.1A |
Rds On (Typ) |
80m Ω |
Built-in Protections |
OVER CURRENT; THERMAL |
Height Seated (Max) |
1.895mm |
Length |
9.9mm |
Width |
3.9mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MIC2546-2YM Overview
As a result, it is packaged in the form of a Tube.There is a 16-SOIC (0.154, 3.90mm Width) package that includes it.The lighting driver is mounted in the Surface Mount position.USB Switch is the switch type it owns.Ensure reliable operation by setting the temperature to -40°C~85°C TA.The LED driver has a total of 2 outputs.It uses a supply voltage of Not Required to operate.There is a maximum output voltage of N-Channel volts on this LED driver.There are Status Flag features available on the LED driving board.It comes under the family of MIC2546.A total of 16 terminations can be found in it.It is necessary to use the 16 pins in order to operate the LED driver.The LED driver has 1 functions.It is necessary to reduce the maximum output current to 1.5A to meet the operation criteria.The supply voltage of 5V is conducive to high efficiency.Surface Mount is mounted in the way.The LED driver has 120mOhm resistance.As a result, the output current is set to 1.5A.In this case, Vsup (maximum supply voltage) is set to 5.5V.
MIC2546-2YM Features
Supplied from 5V
Resistance of 120mOhm
MIC2546-2YM Applications
There are a lot of Microchip Technology MIC2546-2YM Power Switches ICs applications.
- PC Cards
- Smartphone and PDA
- Storage Drives
- Low Voltage I/O System Power
- Various applications equipped with buttons
- Portable GPS
- Hot-Swap Systems
- Gaming
- Hot Swap
- Notebook and Tablet Computers