MIC2546-2YTS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Supplier Device Package | 16-TSSOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2008 |
| Feature | Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Resistance | 120mOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Current Rating | 1.5A |
| Base Part Number | MIC2546 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 1.5A |
| Interface | On/Off |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Current - Output (Max) | 1.5A |
| Nominal Supply Current | 200μA |
| Output Configuration | High Side |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 5 ms |
| Switch Type | USB Switch |
| Number of Inputs | 2 |
| Turn-Off Delay Time | 22 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, Reverse Current |
| Rds On (Typ) | 80mOhm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2546-2YTS Overview
It is package in Tube case.It is included in the package 16-TSSOP (0.173, 4.40mm Width).The mounting type of the LED driver is Surface Mount.This switch is of type USB Switch.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.There is a default setting of 2 for output.It uses a supply voltage of Not Required to operate.A maximum output voltage of N-Channel volts has been specified.In terms of features, the LED driving board has Status Flag.I believe it belongs to the MIC2546 family.The 16 pins are used to operate the LED driver.From the lighting driver, there is a maximum output of 1.5AV.The maximum output current drops to 1.5A in order to meet the operation criteria.The LED driving board is mounted in the way of Surface Mount.Currently, the LED driving board has a resistance of 120mOhm ohms.When this case is used, the output current is set to 1.5A.For stable operation, the maximum operating temperature should be 85°C°C.The unit is designed to operate at a minimum working temperature of -40°C degrees Celsius to ensure reliability.In addition to 5.5VV, it can handle other voltages as well.It is possible to use a voltage as low as 2.7V V as a power supply voltage.2 inputs are available.
MIC2546-2YTS Features
Resistance of 120mOhm
MIC2546-2YTS Applications
There are a lot of Microchip Technology MIC2546-2YTS Power Switches ICs applications.
- Portable GPS Device
- HDD and SSD
- Solid-State Drives
- PC Card Hot Swap
- Hot Swaps
- Gaming
- Portable Music Players
- PC Cards
- Portable/Handheld Devices
- Wireless Modem Data Cards
