MIC2547-2YM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 120mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MIC2547 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 1.5A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Interface | On/Off |
| Nominal Supply Current | 200μA |
| Output Configuration | High Side |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 5 ms |
| Switch Type | USB Switch |
| Turn-Off Delay Time | 22 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, Reverse Current |
| Turn On Time | 5000 μs |
| Output Peak Current Limit-Nom | 0.1A |
| Rds On (Typ) | 80m Ω |
| Built-in Protections | OVER CURRENT; THERMAL |
| Height Seated (Max) | 1.895mm |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2547-2YM Overview
As a result, it is packaged in the form of a Tube.The 16-SOIC (0.154, 3.90mm Width) package contains it.The lighting driver is mounted in the Surface Mount position.This switch is of type USB Switch.It is recommended that the temperature be set to -40°C~85°C TA for reliable performance.There is a default setting of 2 for output.In order to operate, it requires a voltage supply of Not Required.A maximum output voltage of N-Channel volts can be obtained with this LED driver.A lighting driver with Status Flag features is available.It belongs to the family MIC2547.It consists of 16 terminations in total.During operation, the 16 pins are used.It has 1 functions.The maximum output current is reduced to 1.5A to meet the operation criteria.With a supply voltage of 5V, high efficiency is possible.Surface Mount is mounted in the way of this lighting driver.There is 120mOhm resistance on the LED driver.It is set to 1.5A in this case.The maximum supply voltage is set to 5.5V.
MIC2547-2YM Features
Supplied from 5V
Resistance of 120mOhm
MIC2547-2YM Applications
There are a lot of Microchip Technology MIC2547-2YM Power Switches ICs applications.
- Smart Phones, Feature Phones
- Set-Top Boxes
- Solid-State Drives
- Smartphone and PDA
- Hot-Swap Systems
- Portable GPS Device
- Hot Swap
- Storage (HDDs, SSDs)
- Portable GPS
- Notebook and Tablet Computers
