MIC2547-2YTS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Supplier Device Package | 16-TSSOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2008 |
| Feature | Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 120mOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Base Part Number | MIC2547 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 1.5A |
| Interface | On/Off |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Current - Output (Max) | 1.5A |
| Nominal Supply Current | 100μA |
| Output Configuration | High Side |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 5 ms |
| Switch Type | USB Switch |
| Number of Inputs | 2 |
| Turn-Off Delay Time | 22 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, Reverse Current |
| Rds On (Typ) | 80mOhm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2547-2YTS Overview
It is packaged in the form of a Tube.There is a package for it in the 16-TSSOP (0.173, 4.40mm Width) package.A Surface Mount mounting is used for the LED driving board.The switch type is USB Switch.Ensure reliable operation by setting the temperature to -40°C~85°C TA.As a default, the output is set to 2.A voltage of Not Required is used to power it.A maximum output voltage of N-Channel volts has been specified.Features of the lighting driver are Status Flag.It belongs to the MIC2547 family.The operation is carried out using the 16 pins.The maximum output of the LED driving board is 1.5AV.As a result, the maximum output current is reduced to 1.5A in order to meet the operation requirements.It is positioned in the direction of Surface Mount.120mOhm is the resistance of the lighting driver.This case has the output current set to 1.5A.Stable operation is possible with a maximum operating temperature of 85°C°C.A minimum working temperature of -40°C degrees Celsius is required to ensure its reliability.5.5VV is the maximum supply voltage it can handle.It is also capable of running at 2.7V volts if necessary.A total of 2 inputs are available.
MIC2547-2YTS Features
Resistance of 120mOhm
MIC2547-2YTS Applications
There are a lot of Microchip Technology MIC2547-2YTS Power Switches ICs applications.
- Portable Music Players
- Set-Top Boxes
- Set-top-box
- Solid-State Drives
- Wireless Headsets
- Wearable Devices
- Portable/Handheld Devices
- Hot Swaps
- Telecom and Network Systems
- Wireless/Networking Cards
