MIC2548-2YM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-SOIC |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2010 |
| Feature | Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 120mOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Base Part Number | MIC2548 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1.5A |
| Number of Channels | 1 |
| Interface | On/Off |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Current - Output (Max) | 1.5A |
| Nominal Supply Current | 75μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 5 ms |
| Switch Type | USB Switch |
| Turn-Off Delay Time | 22 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature |
| Rds On (Typ) | 80mOhm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2548-2YM Overview
The package is in the form of a Tube.It is included in the package 8-SOIC (0.154, 3.90mm Width).It has been mounted as Surface Mount on the LED driver.The switch type of this switch is USB Switch.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.As a default, the output is set to 1.With a supply voltage of Not Required, the LED driving board operates.It has a maximum output voltage of N-Channel volts.Features of the lighting driver are Status Flag.It belongs to the family MIC2548.It is necessary to use the 8 pins in order to operate the LED driver.There is a maximum output of 1.5AV from the LED driver.To comply with the operation criteria, the maximum output current is reduced to 1.5A.The lighting driver is mounted in the way of Surface Mount.In this case, there is 120mOhm resistance in the LED driving board.We currently have 1 channels available.It is suitable for stable operation to operate at a maximum temperature of 85°C°C.It operates at a minimum working temperature of -40°C degrees Celsius to ensure reliability.There is a maximum supply voltage of 5.5VV that it is capable of handling.It can work with as low a supply voltage as feasible, such as 2.7VV.
MIC2548-2YM Features
Resistance of 120mOhm
1 channels
MIC2548-2YM Applications
There are a lot of Microchip Technology MIC2548-2YM Power Switches ICs applications.
- Hot Swaps
- Wireless Modem Data Cards
- Portable GPS
- PC Cards
- Various applications equipped with buttons
- PDAs
- Wearable Devices
- PC Card Hot Swap
- Mobile Communication Devices
- Low Voltage I/O System Power
