MIC2548A-1YM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-SOIC |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2010 |
| Feature | Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 120mOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Base Part Number | MIC2548A |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1.5A |
| Interface | On/Off |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Current - Output (Max) | 1.5A |
| Nominal Supply Current | 160μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 5 ms |
| Switch Type | USB Switch |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Turn-Off Delay Time | 30 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature |
| Rds On (Typ) | 80mOhm |
| Height | 1.63mm |
| Length | 5mm |
| Width | 3.99mm |
| RoHS Status | ROHS3 Compliant |
MIC2548A-1YM Overview
It is package in Tube case.The 8-SOIC (0.154, 3.90mm Width) package includes it.The mounting type of the LED driver is Surface Mount.The switch type of this switch is USB Switch.It is recommended to set the temperature to -40°C~85°C TA in order to ensure reliable operation.By default, it is set to output 1.The LED driving board is powered by a voltage of Not Required.The maximum output voltage of this LED driver is N-Channel volts.This LED driving board is equipped with Status Flag features in order for it to be useful.The MIC2548A family consists of this type.8 pins are used for operation.From the lighting driver, there is a maximum output of 1.5AV.As a result, the maximum output current is reduced to 1.5A in order to meet the operation requirements.In this case, it is mounted in the way of Surface Mount.Currently, the LED driving board has 120mOhm resistance.There is a maximum input voltage of 5.5V volts.The input voltage minimum is 2.7V volts.Stable operation is possible with a maximum operating temperature of 85°C°C.It operates at a minimum working temperature of -40°C degrees Celsius to ensure reliability.It can handle a maximum voltage of 5.5VV.It can operate at 2.7V volts as well.
MIC2548A-1YM Features
Resistance of 120mOhm
MIC2548A-1YM Applications
There are a lot of Microchip Technology MIC2548A-1YM Power Switches ICs applications.
- USB Protection
- Smart Phones, Feature Phones
- Gaming
- Wireless Headsets
- Wireless Modem Data Cards
- Set-top-box
- Telecom and Network Systems
- Solid State Drivers
- Mobile Communication Devices
- Wearable Devices
