MIC2548A-1YMM

N-Channel PMIC MIC2548A 8 Pin 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Manufacturer: Microchip Technology
Nocochips NO: 536-MIC2548A-1YMM
Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Datasheet: PDF
Stock: 389
Description: N-Channel PMIC MIC2548A 8 Pin 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) (Kg)

Details

Tags

Parameters
Max Operating Temperature	85°C
Min Operating Temperature	-40°C
Base Part Number	MIC2548A
Number of Outputs	1
Output Type	N-Channel
Max Output Current	1.5A
Interface	On/Off
Max Supply Voltage	5.5V
Min Supply Voltage	2.7V
Current - Output (Max)	1.5A
Nominal Supply Current	160μA
Output Configuration	High Side
Voltage - Supply (Vcc/Vdd)	Not Required
Input Type	Non-Inverting
Turn On Delay Time	5 ms
Switch Type	USB Switch
Min Input Voltage	2.7V
Max Input Voltage	5.5V
Turn-Off Delay Time	30 μs
Ratio - Input:Output	1:1
Voltage - Load	2.7V~5.5V
Fault Protection	Current Limiting (Adjustable), Over Temperature
Rds On (Typ)	80mOhm
Height	920μm
Length	3mm
Width	3mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Number of Pins	8
Supplier Device Package	8-MSOP
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2010
Feature	Status Flag
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Resistance	120mOhm

MIC2548A-1YMM Overview

A Tube is used to package it.It's included in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package.The mounting type of the LED driver is Surface Mount.USB Switch is the switch type it owns.Ensure reliable operation by setting the temperature to -40°C~85°C TA.By default, it is set to output 1.A voltage of Not Required is used to power it.It has a maximum output voltage of N-Channel volts.Status Flag features are available on the lighting driver.It comes under the family of MIC2548A.It is necessary to use the 8 pins in order to operate the LED driver.The LED driver output is limited to 1.5AV.The maximum output current must drop to 1.5A to meet the operation criteria.It is positioned in the direction of Surface Mount.Currently, the LED driving board has a resistance of 120mOhm ohms.Voltage input is limited to 5.5V volts.Input voltage must be at least 2.7V volts.It is designed to be stable at 85°C°C, which is the maximum operating temperature.In order to ensure reliability, it must operate at a minimum temperature of -40°C degrees Celsius.As a result, it is only capable of handling voltages up to 5.5VV.It can work with as low a supply voltage as feasible, such as 2.7VV.