MIC2548A-2YM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-SOIC |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2010 |
| Feature | Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 120mOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Base Part Number | MIC2548A |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1.5A |
| Interface | On/Off |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Current - Output (Max) | 1.5A |
| Nominal Supply Current | 160μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 5 ms |
| Switch Type | USB Switch |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Turn-Off Delay Time | 30 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature |
| Rds On (Typ) | 80mOhm |
| Height | 1.63mm |
| Length | 5mm |
| Width | 3.99mm |
| RoHS Status | ROHS3 Compliant |
MIC2548A-2YM Overview
It is packaged in the manner of a Tube.The 8-SOIC (0.154, 3.90mm Width) package includes it.In this case, the LED driving board is mounted as Surface Mount.It owns the USB Switch switch type.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.As a default, the output is set to 1.A voltage of Not Required is used to power it.Voltage output is N-Channel volts at maximum.Status Flag features are available on the lighting driver.The MIC2548A family consists of this type.For operation, we use the 8 pins.1.5AV is the maximum output of the LED driver.It is necessary to reduce the maximum output current to 1.5A to meet the operation criteria.In this case, it is mounted in the way of Surface Mount.It has 120mOhm resistance.The maximum input voltage is 5.5V volts.There is a minimum input voltage of 2.7V volts.Keeping the operating temperature at 85°C°C ensures stable operation.To ensure reliability, the unit operates at a temperature of -40°C degrees Celsius.In terms of supply voltage, it is capable of handling a maximum of 5.5V volts.Supply voltages as low as 2.7VV are possible.
MIC2548A-2YM Features
Resistance of 120mOhm
MIC2548A-2YM Applications
There are a lot of Microchip Technology MIC2548A-2YM Power Switches ICs applications.
- Portable Video Game Players
- Portable GPS Device
- PC Cards
- Hot Swap
- Wireless/Networking Cards
- Hard Disk Drives
- Handheld Devices
- Low Voltage I/O System Power
- Solid State Drivers
- USB Protection
