MIC2548A-2YMM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-MSOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2010 |
| Feature | Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 120mOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Base Part Number | MIC2548A |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1.5A |
| Interface | On/Off |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Current - Output (Max) | 1.5A |
| Nominal Supply Current | 160μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 5 ms |
| Switch Type | USB Switch |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Turn-Off Delay Time | 30 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature |
| Rds On (Typ) | 80mOhm |
| Height | 920μm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
MIC2548A-2YMM Overview
It is packaged in the form of a Tube.This file is included in package 8-TSSOP, 8-MSOP (0.118, 3.00mm Width).A Surface Mount mounting is used for the LED driving board.It owns USB Switch switch type.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.The LED driver is equipped with 1 outputs.In order to operate, it requires a voltage supply of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.A lighting driver with Status Flag features is available.As you can see, it comes from the MIC2548A family.During operation, the 8 pins are used.This LED driver has a maximum output of 1.5AV.As a result, the maximum output current is reduced to 1.5A in order to meet the operation requirements.Surface Mount is mounted in the way.It has a resistance of 120mOhm.This LED driving board can accept voltages up to 5.5V volts as an input.As a minimum input voltage, it requires 2.7V volts.In order to ensure stable operation, a maximum operating temperature of 85°C°C should be maintained.The LED driver must work at a minimum temperature of -40°C degrees Celsius in order to remain reliable.A maximum supply voltage of 5.5VV can be handled by the LED driving board.It can work with as low a supply voltage as feasible, such as 2.7VV.
MIC2548A-2YMM Features
Resistance of 120mOhm
MIC2548A-2YMM Applications
There are a lot of Microchip Technology MIC2548A-2YMM Power Switches ICs applications.
- Hot-Swap Systems
- Set-Top Boxes
- HDD, SSD
- Smartphone and PDA
- Hot Swap
- PC Cards
- Handheld Devices
- Storage (HDDs, SSDs)
- Wearable Devices
- Hot Swap
