MIC2549A-1BM
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Feature | Slew Rate Controlled, Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Finish | TIN LEAD |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Number of Outputs | 1 |
| Qualification Status | COMMERCIAL |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | On/Off |
| Current - Output (Max) | 3A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, Reverse Current |
| Turn On Time | 5000 µs |
| Output Peak Current Limit-Nom | 0.5A |
| Rds On (Typ) | 35m Ω |
| Built-in Protections | OVER CURRENT; THERMAL |
| Output Current Flow Direction | SINK |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
MIC2549A-1BM Overview
As you can see, it's packaged in the way of a Tube.There is a 8-SOIC (0.154, 3.90mm Width) package that includes it.The mounting type of the LED driver is Surface Mount.USB Switch is the switch type that it owns.It is recommended to set the temperature to -40°C~85°C TA in order to ensure reliable operation.By default, it is set to output 1.To operate, it needs a supply voltage of Not Required.It produces a maximum output voltage of N-Channel volts at its maximum output.As far as features are concerned, the LED driving board has Slew Rate Controlled, Status Flag.There are 8 terminations in it.As far as functions are concerned, the lighting driver has 1.The lighting driver's maximum output is 3AV.Using a voltage of 5V allows for high efficiency.This LED driver is equipped with a total of 8 pins.The Vsup value (maximum supply voltage) is set to 5.5V.In order for the lighting driver to operate normally, the supply voltage (Vsup) should be maintained above 2.7V.
MIC2549A-1BM Features
Supplied from 5V
MIC2549A-1BM Applications
There are a lot of Rochester Electronics, LLC MIC2549A-1BM Power Switches ICs applications.
- Handheld Devices
- Smartphone and PDA
- Set-Top Boxes
- Hard Disk Drives
- USB Protection
- Portable GPS Device
- USB Power Distribution
- Portable Music Players
- Storage Drives
- Mobile Communication Devices
