MIC2549A-1YM
| Parameters | |
|---|---|
| Width | 3.94mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-SOIC |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2011 |
| Feature | Slew Rate Controlled, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 50mOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Base Part Number | MIC2549A |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 3A |
| Number of Channels | 1 |
| Voltage | 5.5V |
| Interface | On/Off |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Current - Output (Max) | 3A |
| Nominal Supply Current | 90μA |
| Current | 3A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 5 ms |
| Switch Type | USB Switch |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 25 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, Reverse Current |
| Rds On (Typ) | 35mOhm |
| Height | 1.48mm |
| Length | 4.93mm |
MIC2549A-1YM Overview
The package is in the form of a Tube.There is a 8-SOIC (0.154, 3.90mm Width) package that includes it.The lighting driver has the mounting type Surface Mount.The switch type is USB Switch.In order to guarantee reliable performance, the temperature should be set to -40°C~85°C TA.In this LED driver, there are no outputs available.The LED driving board operates with a supply voltage of Not Required.It produces a maximum output voltage of N-Channel volts at its maximum output.It is equipped with Slew Rate Controlled, Status Flag features.It comes under the family of MIC2549A.During operation, the 8 pins are used.In terms of output, the lighting driver can provide a maximum of 3A V.Maximum output current falls to 3A when operation criteria are met.The lighting driver is mounted in the way of Surface Mount.Currently, the LED driving board has 50mOhm resistance.You can select from 1 channels.It is suitable for stable operation to operate at a maximum temperature of 85°C°C.To ensure reliability, the unit operates at a temperature of -40°C degrees Celsius.5.5VV is the maximum supply voltage it can handle.Supply voltages as low as 2.7VV are possible.
MIC2549A-1YM Features
Resistance of 50mOhm
1 channels
MIC2549A-1YM Applications
There are a lot of Microchip Technology MIC2549A-1YM Power Switches ICs applications.
- HDD, SSD
- Various applications equipped with buttons
- Wireless Modem Data Cards
- Wireless/Networking Cards
- Portable GPS Device
- Smartphone and PDA
- Handheld Devices
- Solid-State Drives
- Storage Drives
- PC Card Hot Swap
