MIC2549A-1YN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Feature | Slew Rate Controlled, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Base Part Number | MIC2549A |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 3A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, Reverse Current |
| Turn On Time | 5000 μs |
| Output Peak Current Limit-Nom | 0.5A |
| Rds On (Typ) | 35m Ω |
| Built-in Protections | OVER CURRENT; THERMAL |
| Output Current Flow Direction | SOURCE |
| Length | 9.525mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
MIC2549A-1YN Overview
As a result, it is packaged in the form of a Tube.In the 8-DIP (0.300, 7.62mm) package, it is included.This LED driving board is mounted using the mounting type Through Hole.USB Switch is the switch type that it owns.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.In this LED driver, there are no outputs available.The LED driving board is powered by a voltage of Not Required.The maximum output voltage is N-Channel volts.It is equipped with Slew Rate Controlled, Status Flag features.It belongs to the MIC2549A family.It has a total of 8 terminations.The operation is carried out using the 8 pins.There are 1 functions of the LED driver.This results in the maximum output current dropping to 3A to meet the operation criteria.It is possible to achieve a high level of efficiency with a supply voltage of 5V.This lighting driver is mounted in the way of Through Hole.The LED driver is configured with a maximum supply voltage of 5.5V (Vsup).Normal operation requires a voltage above 2.7V for the supply voltage.
MIC2549A-1YN Features
Supplied from 5V
MIC2549A-1YN Applications
There are a lot of Microchip Technology MIC2549A-1YN Power Switches ICs applications.
- Hot Swap
- Hot Swaps
- USB Power Distribution
- Hot Swap
- Wireless Headsets
- USB Power Distribution
- Notebook PC
- HDD, SSD
- PC Card Hot Swap
- Storage (HDDs, SSDs)
