Parameters |
Mounting Type |
Through Hole |
Package / Case |
8-DIP (0.300, 7.62mm) |
Surface Mount |
NO |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
JESD-609 Code |
e0 |
Feature |
Slew Rate Controlled, Status Flag |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
8 |
Terminal Finish |
TIN LEAD |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
240 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
2.54mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Pin Count |
8 |
JESD-30 Code |
R-PDIP-T8 |
Number of Outputs |
1 |
Qualification Status |
COMMERCIAL |
Output Type |
N-Channel |
Supply Voltage-Max (Vsup) |
5.5V |
Supply Voltage-Min (Vsup) |
2.7V |
Interface |
On/Off |
Current - Output (Max) |
3A |
Output Configuration |
High Side |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Input Type |
Non-Inverting |
Switch Type |
USB Switch |
Ratio - Input:Output |
1:1 |
Voltage - Load |
2.7V~5.5V |
Fault Protection |
Current Limiting (Adjustable), Over Temperature, Reverse Current |
Turn On Time |
5000 µs |
Output Peak Current Limit-Nom |
0.5A |
Rds On (Typ) |
35m Ω |
Built-in Protections |
OVER CURRENT; THERMAL |
Output Current Flow Direction |
SOURCE |
Length |
9.525mm |
Width |
7.62mm |
RoHS Status |
Non-RoHS Compliant |
MIC2549A-2BN Overview
It is package in Tube case.It is included in the package 8-DIP (0.300, 7.62mm).In this case, the LED driving board is mounted as Through Hole.The switch type is USB Switch.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.The lighting driver is equipped with 1 outputs that can be used.To operate, it needs a supply voltage of Not Required.Voltage output is N-Channel volts at maximum.In terms of features, the LED driving board has Slew Rate Controlled, Status Flag.As a result, there are 8 terminations.It is important to note that the LED driving board has 1 functions.The maximum output of the LED driving board is 3AV.It is possible to obtain high efficiency with a supply voltage of 5V.The LED driving board is equipped with a total of 8 pins.In this case, Vsup (maximum supply voltage) is set to 5.5V.Normal operation requires a voltage above 2.7V for the supply voltage.
MIC2549A-2BN Features
Supplied from 5V
MIC2549A-2BN Applications
There are a lot of Rochester Electronics, LLC MIC2549A-2BN Power Switches ICs applications.
- Portable GPS
- Smart Phones, Feature Phones
- Hot Swap
- Portable/Handheld Devices
- Portable Devices
- Notebook PC
- Gaming
- PC Cards
- HDD, SSD
- USB Ports/Hubs