MIC2549A-2BTS
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Feature | Slew Rate Controlled, Status Flag |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Terminal Finish | TIN LEAD |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 14 |
| Number of Outputs | 1 |
| Qualification Status | COMMERCIAL |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | On/Off |
| Current - Output (Max) | 3A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, Reverse Current |
| Turn On Time | 5000 µs |
| Output Peak Current Limit-Nom | 0.5A |
| Rds On (Typ) | 35m Ω |
| Built-in Protections | OVER CURRENT; THERMAL |
| Output Current Flow Direction | SINK |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | Non-RoHS Compliant |
MIC2549A-2BTS Overview
Tube is how it's packaged.Package 14-TSSOP (0.173, 4.40mm Width) contains it.Surface Mount is the mounting type of the LED driver.It owns the USB Switch switch type.In order to guarantee reliable performance, the temperature should be set to -40°C~85°C TA.By default, it is set to output 1.Operation is based on Not Required supply voltage.There is a maximum output voltage of N-Channel volts.Slew Rate Controlled, Status Flag features are available on the lighting driver.A total of 14 terminations can be found in it.It is important to note that the LED driving board has 1 functions.The LED driver output is limited to 3AV.The supply voltage of 5V is conducive to high efficiency.A total of 14 pins are present on it.This LED driver is configured to have a maximum supply voltage of 5.5V (Vsup).For normal operation, the supply voltage (Vsup) should be kept above 2.7V.
MIC2549A-2BTS Features
Supplied from 5V
MIC2549A-2BTS Applications
There are a lot of Rochester Electronics, LLC MIC2549A-2BTS Power Switches ICs applications.
- PC Card Hot Swap
- Wireless/Networking Cards
- Portable/Handheld Devices
- Low Voltage I/O System Power
- Storage Drives
- Storage (HDDs, SSDs)
- USB Power Distribution
- Telecom and Network Systems
- Portable GPS
- Wearable Devices
