banner_page

MIC2549A-2YTS

N-Channel PMIC MIC2549A 14 Pin 14-TSSOP (0.173, 4.40mm Width)


  • Manufacturer: Microchip Technology
  • Nocochips NO: 536-MIC2549A-2YTS
  • Package: 14-TSSOP (0.173, 4.40mm Width)
  • Datasheet: PDF
  • Stock: 802
  • Description: N-Channel PMIC MIC2549A 14 Pin 14-TSSOP (0.173, 4.40mm Width) (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 14-TSSOP (0.173, 4.40mm Width)
Number of Pins 14
Supplier Device Package 14-TSSOP
Operating Temperature -40°C~85°C TA
Packaging Tube
Published 2011
Feature Slew Rate Controlled, Status Flag
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Base Part Number MIC2549A
Number of Outputs 1
Output Type N-Channel
Max Output Current 3A
Interface On/Off
Current - Output (Max) 3A
Output Configuration High Side
Voltage - Supply (Vcc/Vdd) Not Required
Input Type Non-Inverting
Switch Type USB Switch
Ratio - Input:Output 1:1
Voltage - Load 2.7V~5.5V
Fault Protection Current Limiting (Adjustable), Over Temperature, Reverse Current
Rds On (Typ) 35mOhm
RoHS Status ROHS3 Compliant

MIC2549A-2YTS Overview


The package is in the form of a Tube.In the 14-TSSOP (0.173, 4.40mm Width) package, it is included.This LED driving board is mounted using the mounting type Surface Mount.The switch type of this switch is USB Switch.It is best to set the temperature to -40°C~85°C TA to ensure reliable operation.The lighting driver is equipped with 1 outputs that can be used.A voltage of Not Required is used to power it.It produces a maximum output voltage of N-Channel volts at its maximum output.A lighting driver with Slew Rate Controlled, Status Flag features is available.It belongs to the family MIC2549A.The operation is performed through the 14 pins.The LED driver output is limited to 3AV.This results in the maximum output current dropping to 3A to meet the operation criteria.The lighting driver is mounted in the direction of Surface Mount.It is recommended that the maximum operating temperature be 85°C°C to ensure stable operation.The unit is designed to operate at a minimum working temperature of -40°C degrees Celsius to ensure reliability.

MIC2549A-2YTS Features



MIC2549A-2YTS Applications


There are a lot of Microchip Technology MIC2549A-2YTS Power Switches ICs applications.

  • Wearable Devices
  • Portable GPS
  • Wireless Modem Data Cards
  • Hot Swap
  • Portable GPS Device
  • Hot-Swap Systems
  • USB Power Distribution
  • USB Ports/Hubs
  • PC Card Hot Swap
  • Portable Video Game Players

Write a review

Note: HTML is not translated!
    Bad           Good