MIC2561-0YM
| Parameters | |
|---|---|
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2004 |
| Feature | Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 1Ohm |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Max Power Dissipation | 800mW |
| Current Rating | 200mA |
| Base Part Number | MIC2561 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 200mA |
| Operating Supply Voltage | 15V |
| Interface | Logic |
| Current - Output (Max) | 200mA |
| Output Configuration | Low Side |
| Output Current | 750mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 100μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 50 μs |
| Switch Type | PCMCIA Switch |
| Ratio - Input:Output | 3:2 |
| Voltage - Load | 3.3V 5V 12V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 550mOhm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Supplier Device Package | 14-SOIC |
MIC2561-0YM Overview
As a result, it is packaged in the form of a Tube.This package is included in 14-SOIC (0.154, 3.90mm Width).This lighting drivere has a mounting type of Surface Mount.PCMCIA Switch is the type of switch owned by it.It is best to set the temperature to 0°C~70°C TA to ensure reliable operation.The lighting driver has a total of 2 outputs that are available for use.The LED driving board operates at Not Required volts.A maximum output voltage of N-Channel volts can be obtained with this LED driver.The lighting driver has Status Flag features.It belongs to the family MIC2561.For operation, 14 pins are used.The maximum output of the LED driving board is 200mAV.Maximum output current falls to 200mA when operation criteria are met.Currently, the LED driving board has 1Ohm resistance.When this is the case, the output current is set to 750mA.A supply voltage of 15V is recommended for maximum efficiency.It is designed to be stable at 70°C°C, which is the maximum operating temperature.The unit is designed to operate at a minimum working temperature of 0°C degrees Celsius to ensure reliability.There is a maximum current requirement of 100μA for its operation.
MIC2561-0YM Features
Resistance of 1Ohm
MIC2561-0YM Applications
There are a lot of Microchip Technology MIC2561-0YM Power Switches ICs applications.
- Notebook PC
- PC Card Hot Swap
- Handheld Devices
- PDAs
- Storage (HDDs, SSDs)
- Hot Swap
- USB3.1 Power Delivery
- Portable/Handheld Devices
- Notebook and Tablet Computers
- USB Power Distribution
