MIC2562A-0BM
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Feature | Status Flag |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Terminal Finish | TIN LEAD |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 14 |
| JESD-30 Code | R-PDSO-G14 |
| Number of Outputs | 2 |
| Qualification Status | COMMERCIAL |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 1 |
| Interface | Logic |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 200mA |
| Output Configuration | Low Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | YES |
| Input Type | Non-Inverting |
| Switch Type | PCMCIA Switch |
| Ratio - Input:Output | 3:2 |
| Voltage - Load | 3.3V 5V 12V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 70m Ω |
| Height Seated (Max) | 1.6mm |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
MIC2562A-0BM Overview
As you can see, it's packaged in the way of a Tube.There is a package for it in the 14-SOIC (0.154, 3.90mm Width) package.In this case, the LED driving board is mounted as Surface Mount.This switch is of type PCMCIA Switch.To ensure reliable operation, the temperature should be set to -40°C~85°C TA.In this LED driver, there are no outputs available.A voltage of Not Required is used to power it.The maximum output voltage of this LED driver is N-Channel volts.This LED driving board is equipped with Status Flag features in order for it to be useful.As a result, there are 14 terminations.It consists of 1 functions.The LED driver output is limited to 200mAV.The supply voltage can be 3.3V for high efficiency.14 pins are connected to it in total.The lighting driver is configured to have a maximum supply voltage of 6V (Vsup).A normal operation requires that the supply voltage (Vsup) remain above 3V.There is an analog input IC in this gadget, which is POWER SUPPLY SUPPORT CIRCUIT.We currently have 1 channels available.
MIC2562A-0BM Features
Supplied from 3.3V
1 channels
MIC2562A-0BM Applications
There are a lot of Rochester Electronics, LLC MIC2562A-0BM Power Switches ICs applications.
- Hot Swap
- PC Cards
- Wireless/Networking Cards
- HDD, SSD
- Hot Swap
- USB3.1 Power Delivery
- USB Power Distribution
- USB Ports/Hubs
- Set-Top Boxes
- Wireless Headsets
