MIC2562A-0YM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Supplier Device Package | 14-SOIC |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2004 |
| Feature | Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 150MOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 800mW |
| Current Rating | 1.5A |
| Base Part Number | MIC2562A |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 200mA |
| Operating Supply Voltage | 12V |
| Interface | Logic |
| Current - Output (Max) | 200mA |
| Output Configuration | Low Side |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 100μA |
| Input Type | Non-Inverting |
| Switch Type | PCMCIA Switch |
| Ratio - Input:Output | 3:2 |
| Voltage - Load | 3.3V 5V 12V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 70mOhm |
| Height | 1.48mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2562A-0YM Overview
A Tube is used to package it.It is included with the 14-SOIC (0.154, 3.90mm Width) package as well.This LED driving board is mounted using the mounting type Surface Mount.The switch type of this switch is PCMCIA Switch.To ensure reliable operation, the temperature should be set to -40°C~85°C TA.There is a default setting of 2 for output.With a supply voltage of Not Required, the LED driving board operates.It has a maximum output voltage of N-Channel volts.In terms of features, the LED driving board has Status Flag.The MIC2562A family consists of this type.For operation, 14 pins are used.Its maximum output voltage is 200mAV.The maximum output current is reduced to 200mA to meet the operation criteria.The lighting driver is mounted in the direction of Surface Mount.In this LED driving board, there is 150MOhm resistance.The output current is set to 1A in this case.The supply voltage should be set at 12V for best efficiency.A maximum operating temperature of 85°C°C is required for stable operation.A minimum working temperature of -40°C degrees Celsius is required to ensure its reliability.It has a maximum current requirement of 100μA.
MIC2562A-0YM Features
Resistance of 150MOhm
MIC2562A-0YM Applications
There are a lot of Microchip Technology MIC2562A-0YM Power Switches ICs applications.
- PDAs
- Set-Top Boxes
- Hot Swap
- Portable Video Game Players
- Portable/Handheld Devices
- Hot Swaps
- Low Voltage I/O System Power
- USB Power Distribution
- USB Protection
- Various applications equipped with buttons
