MIC2562A-1BM
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Feature | Status Flag |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Terminal Finish | TIN LEAD |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 14 |
| JESD-30 Code | R-PDSO-G14 |
| Number of Outputs | 2 |
| Qualification Status | COMMERCIAL |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 1 |
| Interface | Logic |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 200mA |
| Output Configuration | Low Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | YES |
| Input Type | Non-Inverting |
| Switch Type | PCMCIA Switch |
| Ratio - Input:Output | 3:2 |
| Voltage - Load | 3.3V 5V 12V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 70m Ω |
| Height Seated (Max) | 1.6mm |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
MIC2562A-1BM Overview
The LED driver's packaged as a Tube.There is a 14-SOIC (0.154, 3.90mm Width) package that includes it.Surface Mount is the mounting type of the LED driver.It owns the PCMCIA Switch switch type.It is best to set the temperature to -40°C~85°C TA to ensure reliable operation.As a default, the output is set to 2.With a supply voltage of Not Required, the LED driving board operates.There is a maximum output voltage of N-Channel volts on this LED driver.A lighting driver with Status Flag features is available.It contains 14 terminations.It is important to note that the LED driving board has 1 functions.In this case, the LED driving board can produce only 200mAV as its maximum output.Using a voltage of 3.3V allows for high efficiency.As a result, it has a total of 14 pins.The LED driver is configured with a maximum supply voltage of 6V (Vsup).In order to operate normally, the supply voltage (Vsup) must remain above 3V.In this case, the analog IC is POWER SUPPLY SUPPORT CIRCUIT.There are a total of 1 available channels.
MIC2562A-1BM Features
Supplied from 3.3V
1 channels
MIC2562A-1BM Applications
There are a lot of Rochester Electronics, LLC MIC2562A-1BM Power Switches ICs applications.
- Solid-State Drives
- USB3.1 Power Delivery
- Portable GPS
- Portable Video Game Players
- Smart Phones, Feature Phones
- Storage Drives
- Hot Swap
- PC Card Hot Swap
- Gaming
- Hot-Swap Systems
