MIC2562A-1YM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Supplier Device Package | 14-SOIC |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2004 |
| Feature | Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 150MOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 800mW |
| Current Rating | 1.5A |
| Base Part Number | MIC2562A |
| Number of Outputs | 2 |
| Output Voltage | 5V |
| Output Type | N-Channel |
| Max Output Current | 200mA |
| Interface | Logic |
| Max Supply Voltage | 5V |
| Current - Output (Max) | 200mA |
| Output Configuration | Low Side |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 100μA |
| Input Type | Non-Inverting |
| Max Output Voltage | 5V |
| Switch Type | PCMCIA Switch |
| Min Output Voltage | 3.3V |
| Ratio - Input:Output | 3:2 |
| Voltage - Load | 3.3V 5V 12V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 70mOhm |
| Height | 1.48mm |
| Length | 8.75mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2562A-1YM Overview
Tube is the way it's packaged.It is included in the package 14-SOIC (0.154, 3.90mm Width).Surface Mount is the mounting type of the LED driver.There is a switch type of PCMCIA Switch.It is recommended to set the temperature to -40°C~85°C TA in order to ensure reliable operation.In this LED driver, there are no outputs available.It uses a supply voltage of Not Required to operate.There is a maximum output voltage of N-Channel volts.It has a total of Status Flag features.The MIC2562A family consists of this type.The operation is performed through the 14 pins.The LED driver output is limited to 200mAV.It is necessary to reduce the maximum output current to 200mA to meet the operation criteria.The lighting driver is mounted in the direction of Surface Mount.150MOhm resistance is present in the lighting driver.This case has the output current set to 1A.It is designed to be stable at 85°C°C, which is the maximum operating temperature.It operates at a minimum working temperature of -40°C degrees Celsius to ensure reliability.It requires a maximum current requirement of 100μA.In terms of supply voltage, it is capable of handling a maximum of 5V volts.
MIC2562A-1YM Features
Resistance of 150MOhm
MIC2562A-1YM Applications
There are a lot of Microchip Technology MIC2562A-1YM Power Switches ICs applications.
- Set-Top Boxes
- USB Power Distribution
- Gaming
- PC Cards
- PC Card Hot Swap
- Mobile Communication Devices
- Portable Devices
- Solid State Drivers
- Portable GPS
- Portable Music Players
