banner_page

MIC2562A-1YTS

N-Channel PMIC MIC2562A 16 Pin 16-TSSOP (0.173, 4.40mm Width)


  • Manufacturer: Microchip Technology
  • Nocochips NO: 536-MIC2562A-1YTS
  • Package: 16-TSSOP (0.173, 4.40mm Width)
  • Datasheet: PDF
  • Stock: 174
  • Description: N-Channel PMIC MIC2562A 16 Pin 16-TSSOP (0.173, 4.40mm Width) (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-TSSOP (0.173, 4.40mm Width)
Number of Pins 16
Supplier Device Package 16-TSSOP
Operating Temperature -40°C~85°C TA
Packaging Tube
Published 2004
Feature Status Flag
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Base Part Number MIC2562A
Number of Outputs 2
Output Type N-Channel
Max Output Current 200mA
Operating Supply Voltage 15V
Interface Logic
Current - Output (Max) 200mA
Output Configuration Low Side
Output Current 200mA
Voltage - Supply (Vcc/Vdd) Not Required
Max Supply Current 100μA
Input Type Non-Inverting
Turn On Delay Time 250 μs
Switch Type PCMCIA Switch
Turn-Off Delay Time 1 μs
Ratio - Input:Output 3:2
Voltage - Load 3.3V 5V 12V
Fault Protection Current Limiting (Fixed), Over Temperature
Rds On (Typ) 70mOhm
Height 900μm
Length 5mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

MIC2562A-1YTS Overview


It is packaged in the manner of a Tube.It is included in the package 16-TSSOP (0.173, 4.40mm Width).The LED driver is mounted as Surface Mount.It owns PCMCIA Switch switch type.To ensure reliable operation, the temperature should be set to -40°C~85°C TA.It is possible to use 2 outputs in the lighting driver.The LED driving board operates at Not Required volts.There is a maximum output voltage of N-Channel volts on this LED driver.Currently, the LED driving board is equipped with Status Flag features.It is a member of the MIC2562A family.For operation, 16 pins are used.There is a maximum output of 200mAV from the LED driver.As a result, the maximum output current is reduced to 200mA in order to meet the operation requirements.The LED driving board is mounted in the way of Surface Mount.When this is the case, the output current is set to 200mA.In order to maximize efficiency, the supply voltage should be set to 15V.It is designed to be stable at 85°C°C, which is the maximum operating temperature.To ensure reliability, the system operates at a minimum temperature of -40°C degrees Celsius.For its operation, a maximum current requirement of 100μA is required.

MIC2562A-1YTS Features



MIC2562A-1YTS Applications


There are a lot of Microchip Technology MIC2562A-1YTS Power Switches ICs applications.

  • Low Voltage I/O System Power
  • Hot Swap
  • Hot Swap
  • Solid State Drivers
  • Portable Devices
  • Smart Phones, Feature Phones
  • USB3.1 Power Delivery
  • PC Cards
  • Storage Drives
  • Hot Swaps

Write a review

Note: HTML is not translated!
    Bad           Good