MIC2562A-1YTS-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Supplier Device Package | 16-TSSOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| Feature | Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 5Ohm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Current Rating | 400mA |
| Base Part Number | MIC2562A |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 200mA |
| Operating Supply Voltage | 15V |
| Interface | Logic |
| Current - Output (Max) | 200mA |
| Output Configuration | Low Side |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 100μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 250 μs |
| Switch Type | PCMCIA Switch |
| Turn-Off Delay Time | 1 μs |
| Ratio - Input:Output | 3:2 |
| Voltage - Load | 3.3V 5V 12V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 70mOhm |
| Height | 900μm |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2562A-1YTS-TR Overview
It is packaged in the form of a Tape & Reel (TR).This package is included in 16-TSSOP (0.173, 4.40mm Width).This lighting drivere has a mounting type of Surface Mount.The switch type of this switch is PCMCIA Switch.Ensure reliable operation by setting the temperature to -40°C~85°C TA.The LED driver has 2 outputs.With a supply voltage of Not Required, the LED driving board operates.The maximum output voltage is N-Channel volts.Status Flag features are available on the lighting driver.There is a MIC2562A family of things that it belongs to.In order to operate, 16 pins are used.Its maximum output voltage is 200mAV.To meet the operation criteria, the maximum output current drops to 200mA.The LED driving board is mounted in the way of Surface Mount.Currently, the LED driving board has a resistance of 5Ohm ohms.This case results in a 200mA output current.For maximum efficiency, the supply voltage should be set to 15V.For stable operation, the maximum operating temperature should be 85°C°C.To ensure reliability, the unit operates at a temperature of -40°C degrees Celsius.It requires 100μA current to operate.
MIC2562A-1YTS-TR Features
Resistance of 5Ohm
MIC2562A-1YTS-TR Applications
There are a lot of Microchip Technology MIC2562A-1YTS-TR Power Switches ICs applications.
- Wireless/Networking Cards
- Set-Top Boxes
- PC Cards
- PDAs
- HDD and SSD
- USB Power Distribution
- USB Ports/Hubs
- Notebook PC
- Portable Music Players
- PC Card Hot Swap
