MIC2563A-0YSM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 28 |
| Supplier Device Package | 28-SSOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2004 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Resistance | 2.5Ohm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Current Rating | 300mA |
| Base Part Number | MIC2563A |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Max Output Current | 200mA |
| Operating Supply Voltage | 12V |
| Interface | Logic |
| Current - Output (Max) | 200mA |
| Output Configuration | Low Side |
| Output Current | 250mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 100μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 50 μs |
| Switch Type | PCMCIA Switch |
| Turn-Off Delay Time | 1 μs |
| Ratio - Input:Output | 3:4 |
| Voltage - Load | 3.3V 5V 12V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 1.8Ohm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2563A-0YSM Overview
The package is in the form of a Tube.There is a package for it in the 28-SSOP (0.209, 5.30mm Width) package.A Surface Mount mounting is used for the LED driving board.The switch type of this switch is PCMCIA Switch.To ensure reliable operation, the temperature should be set to -40°C~85°C TA.The LED driver has 4 outputs.A supply voltage of Not Required is required for it to operate.A maximum output voltage of N-Channel volts can be achieved by this LED driver.There is a MIC2563A family of things that it belongs to.The operation is carried out using the 28 pins.In this case, the LED driving board can produce only 200mAV as its maximum output.To meet the operation criteria, the maximum output current drops to 200mA.2.5Ohm is the resistance of the lighting driver.This case has the output current set to 250mA.In order to maximize efficiency, the supply voltage should be set at 12V.A maximum operating temperature of 85°C°C is required to provide stable operation.To ensure reliability, the unit operates at a temperature of -40°C degrees Celsius.It requires a maximum current requirement of 100μA.
MIC2563A-0YSM Features
Resistance of 2.5Ohm
MIC2563A-0YSM Applications
There are a lot of Microchip Technology MIC2563A-0YSM Power Switches ICs applications.
- Notebook and Tablet Computers
- Portable Video Game Players
- Wireless Headsets
- PC Cards
- Low Voltage I/O System Power
- Wearable Devices
- Set-Top Boxes
- Hard Disk Drives
- Gaming
- Solid-State Drives
