MIC2563A-1YSM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 28 |
| Supplier Device Package | 28-SSOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2004 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Resistance | 2.5Ohm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Current Rating | 300mA |
| Base Part Number | MIC2563A |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Max Output Current | 200mA |
| Interface | Logic |
| Max Supply Voltage | 3V |
| Min Supply Voltage | 3V |
| Current - Output (Max) | 200mA |
| Output Configuration | Low Side |
| Output Current | 250mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 100μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 50 μs |
| Switch Type | PCMCIA Switch |
| Turn-Off Delay Time | 1 μs |
| Ratio - Input:Output | 3:4 |
| Voltage - Load | 3.3V 5V 12V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 1.8Ohm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2563A-1YSM Overview
A Tube is used to package it.There is a package for it in the 28-SSOP (0.209, 5.30mm Width) package.Surface Mount is the mounting type of the LED driver.This switch is of type PCMCIA Switch.It is best to set the temperature to -40°C~85°C TA to ensure reliable operation.The LED driver has 4 outputs.A voltage of Not Required is used to power it.There is a maximum output voltage of N-Channel volts.There is a MIC2563A family of things that it belongs to.The operation is performed through the 28 pins.There is a maximum output of 200mAV from the LED driver.To comply with the operation criteria, the maximum output current is reduced to 200mA.In this case, there is 2.5Ohm resistance in the LED driving board.It is set to 250mA in this case.It is suitable for stable operation to operate at a maximum temperature of 85°C°C.It operates at a minimum working temperature of -40°C degrees Celsius to ensure reliability.This system has a maximum current requirement of 100μA.A maximum supply voltage of 3VV can be handled by the LED driving board.It can also be used at 3Vvolts if needed.
MIC2563A-1YSM Features
Resistance of 2.5Ohm
MIC2563A-1YSM Applications
There are a lot of Microchip Technology MIC2563A-1YSM Power Switches ICs applications.
- Portable Video Game Players
- PDAs
- Telecom and Network Systems
- Handheld Devices
- Portable GPS
- HDD and SSD
- Set-top-box
- Storage (HDDs, SSDs)
- Gaming
- Set-Top Boxes
