MIC2566-0BTS
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e0 |
| Feature | Status Flag |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | ALSO OPERATE FROM 3 TO 5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MIC2566 |
| Pin Count | 14 |
| JESD-30 Code | R-PDSO-G14 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 5.5V |
| Number of Channels | 2 |
| Interface | Logic |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 120mA |
| Output Configuration | Low Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | PCMCIA Switch |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 3.3V 5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 1.4 Ω |
| Height Seated (Max) | 1.1mm |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | Non-RoHS Compliant |
MIC2566-0BTS Overview
As you can see, it's packaged in the way of a Tube.The 14-TSSOP (0.173, 4.40mm Width) package contains it.The lighting driver is mounted in the Surface Mount position.PCMCIA Switch is the switch type that it owns.It is recommended to set the temperature to -40°C~85°C TA in order to ensure reliable operation.In this LED driver, there are no outputs available.The LED driving board operates at Not Required volts.The maximum output voltage of this LED driver is N-Channel volts.Features of the lighting driver are Status Flag.As you can see, it comes from the MIC2566 family.As a result, there are 14 terminations.As far as functions are concerned, the lighting driver has 1.There is a maximum output of 120mAV from the LED driver.It is possible to achieve a high level of efficiency with a supply voltage of 3.3V.As a result, it has a total of 14 pins.The LED driver is configured with a maximum supply voltage of 5.5V (Vsup).In this LED driving board, the analog IC POWER SUPPLY SUPPORT CIRCUIT is employed.You can select from 2 channels.This LED driver can also produce ALSO OPERATE FROM 3 TO 5.5V.
MIC2566-0BTS Features
Supplied from 3.3V
2 channels
Additional features like ALSO OPERATE FROM 3 TO 5.5V
MIC2566-0BTS Applications
There are a lot of Microchip Technology MIC2566-0BTS Power Switches ICs applications.
- Portable Devices
- USB Power Distribution
- Wireless/Networking Cards
- PC Cards
- Mobile Communication Devices
- Various applications equipped with buttons
- Wireless Modem Data Cards
- Hard Disk Drives
- PC Card Hot Swap
- Hot Swaps
