MIC2566-1YM

N-Channel PMIC MIC2566 14 Pin 14-SOIC (0.154, 3.90mm Width)

Manufacturer: Microchip Technology
Nocochips NO: 536-MIC2566-1YM
Package: 14-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 385
Description: N-Channel PMIC MIC2566 14 Pin 14-SOIC (0.154, 3.90mm Width) (Kg)

Details

Tags

Parameters
Input Type	Non-Inverting
Switch Type	PCMCIA Switch
Ratio - Input:Output	1:1
Voltage - Load	3.3V 5V
Fault Protection	Current Limiting (Fixed), Over Temperature
Rds On (Typ)	1.4Ohm
Height	1.48mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	14-SOIC (0.154, 3.90mm Width)
Number of Pins	14
Supplier Device Package	14-SOIC
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2003
Feature	Status Flag
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Max Operating Temperature	85°C
Min Operating Temperature	-40°C
Base Part Number	MIC2566
Number of Outputs	2
Output Type	N-Channel
Max Output Current	120mA
Interface	Logic
Current - Output (Max)	120mA
Output Configuration	Low Side
Voltage - Supply (Vcc/Vdd)	Not Required

MIC2566-1YM Overview

The package is in the form of a Tube.The 14-SOIC (0.154, 3.90mm Width) package contains it.Surface Mount is the mounting type of the LED driver.There is a PCMCIA Switch switch type associated with it.The temperature should be set to -40°C~85°C TA to ensure reliable functioning.The lighting driver has a total of 2 outputs that are available for use.A voltage of Not Required is used to power it.A maximum output voltage of N-Channel volts has been specified.As far as features are concerned, the LED driving board has Status Flag.It comes under the family of MIC2566.The operation is carried out using the 14 pins.This lighting driver is capable of delivering a maximum output of 120mA volts.This results in the maximum output current dropping to 120mA to meet the operation criteria.This lighting driver is mounted in the way of Surface Mount.For stable operation, the maximum operating temperature should be 85°C°C.The unit is designed to operate at a minimum working temperature of -40°C degrees Celsius to ensure reliability.