MIC2582-JYM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-SOIC |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2009 |
| Feature | Latched Fault |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | Hot Swap Controller |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Applications | General Purpose |
| Voltage - Supply | 2.3V~13.2V |
| Depth | 3.94mm |
| Base Part Number | MIC2582 |
| Number of Outputs | 1 |
| Number of Channels | 1 |
| Max Supply Voltage | 13.2V |
| Min Supply Voltage | 2.3V |
| Operating Supply Current | 1.5mA |
| Nominal Supply Current | 1.5mA |
| Max Supply Current | 2.5mA |
| Current - Supply | 1.5mA |
| Internal Switch(s) | No |
| Programmable Features | Slew Rate, UVLO |
| Feature Pins | CPOR, FB, ON, /POR |
| Length | 4.93mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2582-JYM Overview
You can find it in the 8-SOIC (0.154, 3.90mm Width) package.Hot-swappable device is currently possible to access 1 channels.Tube-shaped packaging is used.According to Surface Mount, it has been set up.Hot-swappable device is classified as a Hot Swap Controller electrical component.If you want reliable performance, you should set the temperature to -40°C~85°C.The device has General Purpose applicationsAn article about it appears in Latched Fault.Hot-swappable device should be able to work wHot-swappable deviceh a power source of 2.3V~13.2VV.MIC2582 is a family of numbers.Hot-swappable device is necessary to use 8 pins in order to operate the device.Programmable features include Slew Rate, UVLO.In the present, there is a shortage of 1.5mA.Surface Mount directs its position.Operating at 85°C°C ensures stable performance.To maintain reliability, it functions at a minimum working temperature of -40°C degrees Celsius.The default setting is output 1.Hot Swap is capable of handling a maximum supply voltage of 13.2VV.Hot Swap works wHot Swaph as low a voltage as possible, such as 2.3VV.Hot Swap is 1.5mA that operates the supply current.The maximum current required for its operation is {0}.
MIC2582-JYM Features
Features of Latched Fault
Programmable features of Slew Rate, UVLO
MIC2582-JYM Applications
There are a lot of Microchip Technology MIC2582-JYM hot swap controllers applications.
- Avionics systems
- Datacom
- Storage network
- Inrush current control
- Current monitoring
- Modern analog communication
- Overcurrent protection
- Microcontrollers
- Temperature monitor output
- Loads
