MIC2583-JYQS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Supplier Device Package | 16-QSOP |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2009 |
| Feature | Latched Fault |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | Hot Swap Controller |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Applications | General Purpose |
| Voltage - Supply | 2.3V~13.2V |
| Depth | 3.91mm |
| Base Part Number | MIC2583 |
| Number of Outputs | 1 |
| Number of Channels | 1 |
| Max Supply Voltage | 13.2V |
| Min Supply Voltage | 2.3V |
| Operating Supply Current | 1.5mA |
| Nominal Supply Current | 1.5mA |
| Max Supply Current | 2.5mA |
| Current - Supply | 1.5mA |
| Internal Switch(s) | No |
| Programmable Features | Fault Timeout, Slew Rate, UVLO |
| Feature Pins | CFILTER, CPOR, DIS, /FAULT, FB, ON, /POR, PWRGD |
| Length | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2583-JYQS Overview
As part of the 16-SSOP (0.154, 3.90mm Width) package, it is included.At the moment, 1 channels are accessible.Tube-shaped packaging is used.There is a Surface Mount-like arrangement.In the electrical industry, this component is categoriHot Swap Controllered as Hot Swap Controller.To ensure reliable operation, set the temperature to -40°C~85°C.A General Purpose application is available for the device.Latched Fault features it.Hot-swappable device should be able to work wHot-swappable deviceh a power source of 2.3V~13.2VV.The MIC2583 family includes it.Hot-swappable device is necessary to use 16 pins in order to operate the device.Its programmable features are Fault Timeout, Slew Rate, UVLO.In the present, there is a shortage of 1.5mA.Surface Mount directs its position.Stable operation can be achieved with a maximum operating temperature of 85°C°C.The system must function at a minimum temperature of -40°C degrees Celsius in order to maintain its reliability.Hot Swap is defaulted to output 1.Maximum supply voltage is 13.2VV.Using a low supply voltage, such as 2.3VV, will be feasible.There is an operative supply current called 1.5mA.Hot Swap requires 2.5mA volts of current to operate.
MIC2583-JYQS Features
Features of Latched Fault
Programmable features of Fault Timeout, Slew Rate, UVLO
MIC2583-JYQS Applications
There are a lot of Microchip Technology MIC2583-JYQS hot swap controllers applications.
- Short circuit protection
- Supply voltage monitoring
- USB interface
- Power supply hotswap & inrush control
- Overvoltage protection
- Active current limit
- Distributed power systems
- DC boost circuit
- Continuous monitoring of device temperature
- Avionics systems
