MIC2583-KBQS
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Feature | Latched Fault |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Hot Swap Controller |
| Terminal Finish | TIN LEAD |
| Applications | General Purpose |
| Additional Feature | UNDERVOLTAGE LOCKOUT PROTECTION, POWER ON RESET |
| Voltage - Supply | 2.3V~13.2V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 16 |
| Supply Voltage-Min (Vsup) | 2.3V |
| Number of Channels | 1 |
| Adjustable Threshold | YES |
| Current - Supply | 1.5mA |
| Internal Switch(s) | No |
| Programmable Features | Fault Timeout, Slew Rate, UVLO |
| Feature Pins | CFILTER, CPOR, DIS, /FAULT, FB, ON, /POR, PWRGD |
| Length | 4.89mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
MIC2583-KBQS Overview
This is included in the 16-SSOP (0.154, 3.90mm Width) package.At the moment, 1 channels are accessible.Hot-swappable device comes in the shape of a Tube.There are a total of 16 terminations on it.Device DUAL is in the terminal position.The device consists of a total of 16 pins.Hot-swappable device is possible to achieve high efficiency wHot-swappable deviceh a supply voltage of 5V.Surface Mount is set up this way.Electric components of this type are classified as Hot Swap Controller.The temperature should be set to -40°C~85°C to ensure reliable functioning.There are General Purpose applications available for the device.There is a mention of it in Latched Fault.In the case of a 2.3V~13.2VV power source, it should work just fine.There are Fault Timeout, Slew Rate, UVLO programmable features on this device.There is currently an adequate supply of 1.5mA.Hot-swappable device is recommended to keep the supply voltage (Vsup) above 2.3V so that the device can function normally.This device can also be used to produce UNDERVOLTAGE LOCKOUT PROTECTION, POWER ON RESET as well.
MIC2583-KBQS Features
The terminal position of 16
Features of Latched Fault
Programmable features of Fault Timeout, Slew Rate, UVLO
MIC2583-KBQS Applications
There are a lot of Rochester Electronics, LLC MIC2583-KBQS hot swap controllers applications.
- Firewire
- Servers
- Distributed power systems
- Storage network
- Redundant Array of Disks (RAID)
- Current monitor output
- Reverse current protection
- ISDN system
- Base station power distribution system
- Backplane
