MIC2583-LYQS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Supplier Device Package | 16-QSOP |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2009 |
| Feature | Latched Fault |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | Hot Swap Controller |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Applications | General Purpose |
| Voltage - Supply | 2.3V~13.2V |
| Depth | 3.91mm |
| Base Part Number | MIC2583 |
| Number of Outputs | 1 |
| Number of Channels | 1 |
| Max Supply Voltage | 13.2V |
| Min Supply Voltage | 2.3V |
| Operating Supply Current | 1.5mA |
| Max Supply Current | 2.5mA |
| Current - Supply | 1.5mA |
| Internal Switch(s) | No |
| Programmable Features | Fault Timeout, Slew Rate, UVLO |
| Feature Pins | CFILTER, CPOR, DIS, /FAULT, FB, ON, /POR, PWRGD |
| Length | 4.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2583-LYQS Overview
It's included in the 16-SSOP (0.154, 3.90mm Width) package.At present, 1 channels are available.The package looks like a Tube.Surface Mount is set up this way.Hot-swappable device is classified as a Hot Swap Controller electrical component.Ensure reliable operation by setting the temperature to -40°C~85°C.A General Purpose application is available for the device.An article about it appears in Latched Fault.With a 2.3V~13.2VV power source, it should work.Numbers in the MIC2583 family include it.A 16 pin is used for operation.Programmable features include Fault Timeout, Slew Rate, UVLO.In the present, there is a shortage of 1.5mA.Hot-swappable device is posHot-swappable deviceioned in the direction of Surface Mount.Hot-swappable device is possible to maintain stable operation at a maximum temperature of 85°C°C.Hot-swappable device functions at a minimum working temperature of -40°C degrees Celsius in order to maintain reliabilHot-swappable devicey.Hot Swap is defaulted to output 1.A maximum voltage of 13.2VV can be supplied to it.Hot Swap can work wHot Swaph as low a supply voltage as feasible, such as 2.3VV.1.5mA is the operative supply current.2.5mA is the maximum current required for its operation.
MIC2583-LYQS Features
Features of Latched Fault
Programmable features of Fault Timeout, Slew Rate, UVLO
MIC2583-LYQS Applications
There are a lot of Microchip Technology MIC2583-LYQS hot swap controllers applications.
- Temperature monitor output
- Modern analog communication
- Loads
- Limitting the inrush current
- Avionics systems
- Continuous monitoring of device temperature
- Comprehensive analog and digital capabilities
- Current monitoring
- Load transient protection
- ISDN system
