MIC2583-MYQS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Supplier Device Package | 16-QSOP |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2009 |
| Feature | Latched Fault |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | Hot Swap Controller |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Applications | General Purpose |
| Voltage - Supply | 2.3V~13.2V |
| Depth | 3.91mm |
| Base Part Number | MIC2583 |
| Number of Outputs | 1 |
| Number of Channels | 1 |
| Max Supply Voltage | 13.2V |
| Min Supply Voltage | 2.3V |
| Operating Supply Current | 1.5mA |
| Max Supply Current | 2.5mA |
| Current - Supply | 1.5mA |
| Internal Switch(s) | No |
| Programmable Features | Fault Timeout, Slew Rate, UVLO |
| Feature Pins | CFILTER, CPOR, DIS, /FAULT, FB, ON, /POR, PWRGD |
| Length | 4.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2583-MYQS Overview
Package 16-SSOP (0.154, 3.90mm Width) includes it.At the moment, there are 1 channels available.Tube-shaped packaging is used for this product.There is a Surface Mount-like arrangement.In the electrical industry, this component is categoriHot Swap Controllered as Hot Swap Controller.Hot-swappable device is recommended that the temperature is set to -40°C~85°C in order to ensure reliable performance.There are General Purpose applications available for the device.Latched Fault features it.In the case of a 2.3V~13.2VV power source, it should work just fine.Hot-swappable device is included in the MIC2583 family of numbers.16 pins are used to operate the system.Fault Timeout, Slew Rate, UVLO is its programmable feature.Presently, 1.5mA is in short supply.Surface Mount is its direction of movement.The maximum operating temperature of 85°C°C allows for stable operation.Hot-swappable device functions at a minimum working temperature of -40°C degrees Celsius in order to maintain reliabilHot-swappable devicey.The default setting is output 1.Hot Swap can handle a maximum supply voltage of 13.2VV.Using low supply voltages, such as 2.3VV, is feasible.There is an operative supply current called 1.5mA.In order for it to operate, a current of 2.5mA is required.
MIC2583-MYQS Features
Features of Latched Fault
Programmable features of Fault Timeout, Slew Rate, UVLO
MIC2583-MYQS Applications
There are a lot of Microchip Technology MIC2583-MYQS hot swap controllers applications.
- Overvoltage protection
- PC board hot swap insertion and removal
- Board or blade insertion into live backplanes
- Loads
- Network switches
- Limitting the inrush current
- Industrial computers and servers
- Central office switching systems
- Comprehensive analog and digital capabilities
- USB interface
